MORSE® 29294 1655H Chucking Reamer, 0.2085 in Dia x 5 in OAL, 0.2016 in Dia Straight Shank, Straight Flute
MORSE® 29294 1655H Chucking Reamer, 0.2085 in Dia x 5 in OAL, 0.2016 in Dia Straight Shank, Straight Flute
-
BrandMORSE®
-
UPC686125292942
-
Manufacturer Part Number29294
-
CountryUSA
-
FinishBright
-
MaterialHSS
-
Flute Length1-1/4 in
-
Flute TypeStraight
-
Series1655H
-
Shank Diameter0.2016 in
-
Number of Flutes6
-
Cutting DirectionRight Hand
-
Shank TypeStraight
-
Diameter0.2085 in
-
Overall Length5 in
- 45 deg chamfer for reaming most materials
-
UNSPSC23241645
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 29294 1655H Chucking Reamer, 0.2085 in Dia x 5 in OAL, 0.2016 in Dia Straight Shank, Straight Flute
MORSE® 29294 1655H Chucking Reamer, 0.2085 in Dia x 5 in OAL, 0.2016 in Dia Straight Shank, Straight Flute
BBI 455170 Partially Threaded Cap Screw, 3/8-16, 5-3/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455170 Partially Threaded Cap Screw, 3/8-16, 5-3/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 451842 Partially Threaded Cap Screw, 1-3/4-5, 13 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451842 Partially Threaded Cap Screw, 1-3/4-5, 13 in L Under Head, 8 Grade, Alloy Steel, Plain
ITM C63NC0005 Plug Tap, 5-40 NC Thread, H2 Thread Limit
Dichtomatik N70033 O-Ring, 033 Dash Number, 1.989 in ID x 2.129 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
REPLACEMENT OUTDOOR FAUCET HANDLE-JWH456786>
