Hougen 3/4" X 1"-DEPTH METAL CUTTERS HOU 12124
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
-
BrandHougen®
-
UPC662850002339
-
Manufacturer Part Number12124
-
CountryUSA
-
FinishBright
-
MaterialM2 HSS
-
Applicable MaterialsMild Steel, Structural Steel, Aluminum, Stainless Steel, Ferrous and Non-Ferrous Materials
-
Series12000
-
Cutter Diameter3/4 in
-
Cutting Depth1 in
-
Shank Size3/4 in
-
Shank TypeWeldon with 2-Flat
- Ground and fully fluted - Provides better chip evacuation, requires less hp and offers better performance in deeper holes
- Two flats for cutter mounting - This system is very rigid and offers up to 2x the tool life as compared to quick change tool mounting on competitive products
- OD Margin - Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish
- ID Taper - Relief area between slug and cutter
- The Hougen-Edge® feature is a patented tooth geometry that provides long tool life, less chatter and extended resharpenability
- The slug also offers a higher scrap value than loose chips
- For use with 10527 pilot
- For use with Hougen® portable magnetic drills and many competitive models on materials up to 6 in thick
- They are made from hardened M2 high speed steel and are precision-ground for excellent performance throughout the cut and long tool life
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | FZ8012124 |
-
UNSPSC23241600
-
Catalog
-
Owners/User Manual
Recently Viewed
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
#6 X 1" Flat Head Slotted Wood Screw
Delivering 450 ft-lb fastening torque and 600 ft-lb nut-busting torque, the M18™ FUEL™ mid-torque impact wrench is more powerful while also being upto 2 in shorter and upto 1.5 lb lighter than many competitive impact wrenches. The POWERSTATE™ brushless motor delivers upto 0 to 2400 rpm resulting in increased productivity. REDLINK™ Plus™ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM™ compact batteries or extended capacity batteries, the M18™ FUEL™ mid-torque delivers more work per charge and more work over the life of the pack than competitive batteries on the market. The 3-mode DRIVE CONTROL™ provides greater control over output speed and power for greater versatility. At 6.7 in in length and 5.3 lb with a 5.0 Ah battery, the M18™ FUEL™ 1/2 in mid-torque impact wrench delivers the balance and weight desired by professionals for all day use. This tool offers quick, tool-free socket changes with a 1/2 in friction ring anvil. A new overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.
#4 X 1" Flat Head Phillips Wood Screw
Weiler® 17612 Conflex Wheel Brush, 2-1/2 in Dia Brush, 3/8 in W Face, 0.006 in Dia Crimped Filament/Wire
Weiler® 17612 Conflex Wheel Brush, 2-1/2 in Dia Brush, 3/8 in W Face, 0.006 in Dia Crimped Filament/Wire
Milwaukee® 49-59-2150 Annular Cutter, 1-1/2 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
