Milwaukee® 49-57-2060 Annular Cutter, 2-1/16 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 2-3/4 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 2-3/4 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
-
BrandMilwaukee®
-
UPC045242202607
-
Manufacturer Part Number49-57-2060
-
CountryUSA|Canada
-
FinishUncoated
-
MaterialCarbide
-
TypeThreaded Hole
-
Applicable MaterialsCast Iron, Mild Steel, Non-Ferrous Soft Metal, Soft/Medium Steel and Stainless Steel
-
Cutter Diameter2-1/16 in
-
Cutting Depth2 in
-
Shank Size3/4 in
-
Cutting Edge MaterialCarbide
-
Shank TypeThreaded
- Accurate cuts, Spring-loaded, self-ejecting pin doubles as a centering pin and permits faster plug removal
- Faster cutting, Alternating tooth form geometry makes fast work of cutting steel
- Accurate cuts - spring-loaded, self-ejecting pin doubles as a centering pin and permits faster plug removal
- Quick change tang drive - fast change-outs let you work more efficiently
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 48Z602 |
| MSC | 98825862 |
-
Alternative Part Number8597231
-
UNSPSC27112826
-
IDEA Index ID8597231
-
Package DescriptionEACH
-
Standards/ApprovalsOSHA Compliant|UL Listed
-
WarrantyNo Warranty
Recently Viewed
Milwaukee® 49-57-2060 Annular Cutter, 2-1/16 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 2-3/4 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 2-3/4 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
CEMENT BASED WITH SILICA SAND RESULTING IN DENSE, HARD JOINTS WITHOUT CRACKING OR SHRINKING. GRAY. SOLD IN 7 LB BOX-JWH267775 >
Milwaukee® 49-57-0626 Tang Drive Annular Cutter, 5/8 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 5/8 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
RIDGID® 14213 S14 General Purpose Heavy Duty Bolt Cutter, 5/16 in Soft Materials Cutting, 15 in OAL, Center Cut, Alloy Steel Jaw
RIDGID® 14213 S14 General Purpose Heavy Duty Bolt Cutter, 5/16 in Soft Materials Cutting, 15 in OAL, Center Cut, Alloy Steel Jaw
GEARWRENCH® 9130D Open End Regular Length Combination Wrench, 30 mm Wrench, 12 Points, 0/15 deg Offset, 15.846 in OAL, Polished Chrome
GEARWRENCH Original ratcheting wrenches combine the speed of a ratchet with the access and control of a wrench. They offer the ease of 5 degrees of movement to turn fasteners, versus 30 degrees on standard combination wrenches. The small ratcheting box end head design enables access to tight spots where a ratchet won't fit. The open end allows for easier access on tough to reach spots, making jobs go faster and easier. This set is a great addition to any mechanic tools collection.
Hougen® RotaCut™ 11116C 11000 Imperial Hole Cutter With 3/8-24 Threaded Hole, 1/2 in Dia Cutter, 1/4 in D Cutting, M2 HSS, 3-Flat Shank
Hougen rotacut sheet metal cutters are precision ground and creates clean, burr-free, round holes without deforming the surrounding material. Cutter makes hole making faster and easier when used on sheet metal, plate materials and plastics. Cutter cuts 3 times faster than twist drills or hole saws and lasts 10 times longer making it ideal for electrical, piping, conduit work, sheet metal fabrication, spot weld removal, maintenance installations, HVAC, PHCC, automotive aftermarket and many others.
