Hougen® 12244 12000 Annular Cutter, 1-3/8 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
-
BrandHougen®
-
UPC662850002759
-
Manufacturer Part Number12244
-
CountryUSA
-
FinishBright
-
MaterialM2 HSS
-
Applicable MaterialsMild Steel, Structural Steel, Aluminum, Stainless Steel, Ferrous and Non-Ferrous Materials
-
Cutter Diameter1-3/8 in
-
Cutting Depth2 in
- Ground and fully fluted - Provides better chip evacuation, requires less hp and offers better performance in deeper holes
- Two flats for cutter mounting - This system is very rigid and offers up to 2x the tool life as compared to quick change tool mounting on competitive products
- OD Margin - Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish
- ID Taper - Relief area between slug and cutter
- The Hougen-Edge® feature is a patented tooth geometry that provides long tool life, less chatter and extended resharpenability
- The slug also offers a higher scrap value than loose chips
- For use with 10528 pilot
- For use with Hougen® portable magnetic drills and many competitive models on materials up to 6 in thick
- They are made from hardened M2 high speed steel and are precision-ground for excellent performance throughout the cut and long tool life
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | FZ8012244 |
| Berkshire eSupply | FZ8012244 |
-
UNSPSC23241600
-
Owners/User Manual
-
Catalog
Recently Viewed
Hougen® 12244 12000 Annular Cutter, 1-3/8 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
3/4" X 18" WIRE BRAD-JWH722837 >
Selkirk® by Duravent LockTab® 106082 RV Series Type B Small Diameter Double Wall Round Gas Vent Pipe, Steel, 6 in Dia x 12 in Adjustable L, Galvanized, Domestic
Our non-positional lock system on the Selkirk® by Duravent RV Gas Vent is the best lock system on the market today. The incorporation of the LockTab® feature simply improves our lock system by adding flexibility and meeting market needs.
Starrett® 156M Screw Pitch Gauge, 0.25 to 2.5 mm Measuring, 28 Leaves, Steel
The Starrett 156M Screw Pitch Gage includes locking device, 28 leaves, and 0.25-2.50mm range. 60 Deg Threads.
Milwaukee® 0960-20 M12™ FUEL™ Cordless Handheld Wet/Dry Vacuum, 6 A, 1.6 gal Tank, 12 V, Polycarbonate Housing
The MILWAUKEE® M12 FUEL™ 1.6 Gallon Wet/Dry Vacuum is the first cordless 12V wet/dry vacuum of its kind. It delivers up to 40% more suction than 18V competitors, is the most compact, and is up to 2X quieter compared to other common wet/dry vacuums. The POWERSTATE™ brushless motor delivers up to 45 CFM and 42" of suction. It's compact footprint stores neatly in a van or cart with a stackable design and organized on-board storage conveniently keeps the attachments inside of the unit. It also comes with a wall mount hanging plate for increased storage options. With 14 minutes of runtime on high and 26 minutes on the low setting, this compact vacuum cleaner is ideal for spot and service focused wet/dry quick clean up needs. The cordless wet/dry vac (0960-20) comes with a flexible hose, crevice tool, utility nozzle, wall mount, and a certified HEPA filter.
IKO BA1212ZOH Inch Series Caged Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 3/4 in Dia Bore, 1 in OD, 1 Row, 3/4 in W, 11900 N Dynamic/17700 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
