Milwaukee® 49-57-1375 Annular Cutter, 1-3/8 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 1-3/8 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 1-3/8 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
-
BrandMilwaukee®
-
UPC045242202003
-
Manufacturer Part Number49-57-1375
-
CountryUSA|Canada
-
FinishUncoated
-
MaterialCarbide
-
TypeThreaded Hole
-
Applicable MaterialsCast Iron, Mild Steel, Non-Ferrous Soft Metal, Soft/Medium Steel and Stainless Steel
-
Cutter Diameter1-3/8 in
-
Cutting Depth2 in
-
Shank Size3/4 in
-
Cutting Edge MaterialCarbide
-
Shank TypeThreaded
- Accurate cuts, Spring-loaded, self-ejecting pin doubles as a centering pin and permits faster plug removal
- Faster cutting, Alternating tooth form geometry makes fast work of cutting steel
- Long life, Abrasion-resistant carbide teeth increase cutter life and produce a cleaner cut
- Quick change shank
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 4AK66 |
| MSC | 97674402 |
-
Alternative Part Number8596800
-
UNSPSC27112826
-
IDEA Index ID8596800
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|OSHA Compliant|UL Listed
-
WarrantyNo Warranty
Recently Viewed
Milwaukee® 49-57-1375 Annular Cutter, 1-3/8 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 1-3/8 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 1-3/8 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
2-HANDLE SEAT STAINLESS STEEL SPRINGS FAUCET KIT-JWH405299 >
Irwin® Speedbor® 88822 2000 Standard Length Spade Bit, 1-3/8 in Dia, 6 in OAL, 5 in L Flute Flat Flute, 1/4 in Shank
No matter what wood-boring project you face, IRWIN makes a drill bit to do the job better. Whether the job requires quick, clean holes or precise finish work, theres an IRWIN bit for it. Our mark of quality is stamped on the shank of our full range of bits for every application and every need.
MARXMAN™ 85022 330QI General Purpose Jobber Length Drill Bit, 13/32 in Drill - Fraction, 0.4062 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MARXMAN™ 85022 330QI General Purpose Jobber Length Drill Bit, 13/32 in Drill - Fraction, 0.4062 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Hougen® Rotabroach® 12266 12000 Annular Cutter, 2-1/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Milwaukee® 49-57-1625 Annular Cutter, 1-5/8 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 1-5/8 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 1-5/8 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
