Hougen® Rotabroach™ 12262 12000 Imperial Annular Cutter, 1-15/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Double Flat Shank
Hougen® Rotabroach™ 12262 12000 Imperial Annular Cutter, 1-15/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Double Flat Shank
-
BrandHougen®
-
Manufacturer Part Number12262
-
CountryUSA
-
MaterialM2 HSS
-
Cutter Diameter1-15/16 in
-
Cutting Depth2 in
-
Cutting Edge MaterialM2 HSS
- Hardened M2 high speed steel material
- Precision ground and fully fluted provides better chip evacuation, requires less horsepower and offers better performance in deeper holes
- 3/4 in double flatted shank is very rigid and offers up to two times the tool life as compared to quick change tool mounting on competitive products
- Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish
- Patented hougen edge geometry provides faster, smoother cuts, with less chatter
- Tapered inner diameter provides a relief area between the slug and cutter to reduce horsepower and improve slug ejection
- Up to 10 cutting edges distribute the cutting load evenly to maximize feed rates
- Slug offers a higher scrap value than loose chips
- Makes large diameter holes efficiently without the mess of chips
- Hole produces a slug of material that could be used for another job
- For use with Hougen® portable magnetic drill sand many competitive models on materials up to 275 BHN (28.5 HRc)
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | FZ8012262 |
| Berkshire eSupply | FZ8012262 |
-
UNSPSC23241600
-
Catalog
Recently Viewed
Hougen® Rotabroach™ 12262 12000 Imperial Annular Cutter, 1-15/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Double Flat Shank
Hougen® Rotabroach™ 12262 12000 Imperial Annular Cutter, 1-15/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Double Flat Shank
MORSE® 11384 1340 General Purpose Jobber Length Drill Bit, #51 Drill - Wire, 0.067 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 11384 1340 General Purpose Jobber Length Drill Bit, #51 Drill - Wire, 0.067 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Lincoln® 1147 Heavy Duty Grease Gun, 14.5 oz Cartridge, 10000 psi psi Operating, 33 oz Output, 1/8 in in Outlet
The first choice of top mechanics and industrial maintenance professionals. These guns are designed for rough treatment on the job with cast iron pump heads, precision fit plungers, and more.
Hougen® Rotabroach® 12217 12000 Annular Cutter, 17/32 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
MORSE® 11381 1340 General Purpose Jobber Length Drill Bit, #53 Drill - Wire, 0.0595 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 11381 1340 General Purpose Jobber Length Drill Bit, #53 Drill - Wire, 0.0595 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MARXMAN™ 85089 330QI General Purpose Jobber Length Drill Bit, #35 Drill - Wire, 0.11 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MARXMAN™ 85089 330QI General Purpose Jobber Length Drill Bit, #35 Drill - Wire, 0.11 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
