Milwaukee® 49-59-2113 Annular Cutter, 1-1/8 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
-
BrandMilwaukee®
-
UPC045242207916
-
Manufacturer Part Number49-59-2113
-
CountryUSA|Canada
-
FinishOxide Treated
-
MaterialHSS
-
Applicable MaterialsAluminum, Brass, Copper, Mild Iron, Steel and Wood
-
Cutter Diameter1-1/8 in
-
Cutting Depth2 in
-
Shank Size3/4 in
-
Cutting Edge MaterialHSS
-
Shank TypeWeldon
- 15% Faster cutting - Thinner wall construction displaces less material
- Dual alternating tooth geometry - Double bevel and flat teeth cut more aggressively and boost chip ejection
- Long lasting - Proprietary steel with three hardness zones reduces breakage and extends bit life
- Multipurpose 3/4 Weldon shank - Works with most magnetic drill presses and large magnetic presses with the right sized arbor
- Versatile design - One centering and ejecting pin size works for all 2 depth cutters
- Versatile design - One centering and ejecting pin size works for all 1 in D cutters
- Multi-purpose 3/4 in weldon shanks - works with most magnetic drill presses and large magnetic presses with the right sized arbor
- Advanced tooth geometry cuts, cleans, and clears the material while drilling
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 04417259 |
| Grainger | 21R645 |
-
Alternative Part Number8599478
-
UNSPSC27112826
-
IDEA Index ID8599478
-
Package DescriptionEACH
-
WarrantyNo Warranty
Recently Viewed
Milwaukee® 49-59-2113 Annular Cutter, 1-1/8 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
Fluke® FLUKE-62-MAX Mini Infrared Thermometer, 32 to 122 deg F, +/-1.5 deg C or +/-1.5% of Reading, Whichever is Greater, -10 to 0 deg C: +/-2.0, -30 to -10 deg C: +/-3.0 Accuracy, 10:1 Focus Spot, 0.1 to 1, AA Battery
The Fluke® 62 max infrared thermometer delivers many of the features of the Fluke® 62 max, but features a single laser and 10:1 distance to spot ratio. You can use the Fluke® 62 max to perform non-contact temperature measurements on transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves and vents. It is small in size and extremely easy to use. The single laser helps you pinpoint the target for more accurate readings and makes it easier to measure temperatures in hard to reach areas. With its IP54 rating for dust and water resistance you can rely the Fluke® 62 max to deliver accurate, repeatable temperature measurements, rain or shine, in even the dirtiest and dustiest industrial sites. And it's rugged enough to take a 3 m drop so no worries even if you work from a ladder.
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Gates® Power Transmission Tri-Power® BX99 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 102 in L Outside, 13/32 in THK, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
PIPE INSULATION-NIBINSFG3X1/2 >
Reelcraft® S600535-1 Fuel Gas Swivel Assembly, For Use With TW80000 Series Welding Hose Reels
Reelcraft® S600535-1 Fuel Gas Swivel Assembly, For Use With TW80000 Series Welding Hose Reels
