Hougen® Rotabroach® 12136 12000 Annular Cutter, 1-1/8 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
-
BrandHougen®
-
UPC662850002407
-
Manufacturer Part Number12136
-
CountryUSA
-
FinishBright
-
MaterialM2 HSS
-
Applicable MaterialsMild Steel, Structural Steel, Aluminum, Stainless Steel, Ferrous and Non-Ferrous Materials
-
Cutter Diameter1-1/8 in
-
Cutting Depth1 in
- Ground and fully fluted - Provides better chip evacuation, requires less hp and offers better performance in deeper holes
- Two flats for cutter mounting - This system is very rigid and offers up to 2x the tool life as compared to quick change tool mounting on competitive products
- OD Margin - Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish
- ID Taper - Relief area between slug and cutter
- The Hougen-Edge® feature is a patented tooth geometry that provides long tool life, less chatter and extended resharpenability
- The slug also offers a higher scrap value than loose chips
- For use with 10527 pilot
- For use with Hougen® portable magnetic drills and many competitive models on materials up to 6 in thick
- They are made from hardened M2 high speed steel and are precision-ground for excellent performance throughout the cut and long tool life
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | FZ8012136 |
| Berkshire eSupply | FZ8012136 |
-
UNSPSC23241600
-
Catalog
-
Owners/User Manual
Recently Viewed
Hougen® Rotabroach® 12136 12000 Annular Cutter, 1-1/8 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Advance Centium® ICN2S40N35I Electronic Fluorescent Ballast, 40 W Lamp, 120 to 277 V AC, Rapid, 0.85 Ballast Factor
No matter what the conditions require, operating at a variety of line voltages between 120 to 480 VAC, whether located in high ambient temperature environments (requiring a 90 deg C rating) or not, our family of Philips Advance Centium® ballasts are ideal for a wide variety of applications.
BELL® 5146-5 Weatherproof Flip Cover, 2-13/16 in L x 0.7969 in W x 4-9/16 in D, Die Cast Aluminum
BELL® 5146-5 Weatherproof Flip Cover, 2-13/16 in L x 0.7969 in W x 4-9/16 in D, Die Cast Aluminum
Hougen® Rotabroach® 12122 12000 Annular Cutter, 11/16 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
GEARWRENCH® 80324 Professional Socket Set, ASME B107.1/B107.10, 6 Points, 1/4 in Drive, 13 Pieces, Included Socket Size: 3/16 to 1/2 in, Blow Molded Case Container
GEARWRENCH® mechanics tools have all been designed with the professional user in mind to increase productivity, access and strength. The sockets, ratchets and drive tool accessories are made from premium alloy steel and feature a full polished chrome finish that resists rust and corrosion. Large, hard stamped markings allow for easy identification and can be easily recognized as SAE (double line) or metric (knurled line). Additionally, the off-corner loading design puts force on the flats of fasteners for improved durability and reduced fastener rounding. They are a must have for every tool box.
6" CRIMPED WIRE CUP BRUSH - OSB32136>
