Milwaukee® 49-57-1250 Annular Cutter, 1-1/4 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 1-1/4 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 1-1/4 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
-
BrandMilwaukee®
-
UPC045242201853
-
Manufacturer Part Number49-57-1250
-
CountryUSA|Canada
-
FinishUncoated
-
MaterialCarbide
-
TypeThreaded Hole
-
Applicable MaterialsCast Iron, Mild Steel, Non-Ferrous Soft Metal, Soft/Medium Steel and Stainless Steel
-
Cutter Diameter1-1/4 in
-
Cutting Depth2 in
-
Shank Size3/4 in
-
Cutting Edge MaterialCarbide
-
Shank TypeThreaded
- Accurate cuts, Spring-loaded, self-ejecting pin doubles as a centering pin and permits faster plug removal
- Faster cutting, Alternating tooth form geometry makes fast work of cutting steel
- Accurate cuts - spring-loaded, self-ejecting pin doubles as a centering pin and permits faster plug removal
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 4AK64 |
| MSC | 01010917 |
-
Alternative Part Number8596717
-
UNSPSC27112826
-
IDEA Index ID8596717
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|OSHA Compliant|UL Listed
-
WarrantyNo Warranty
Recently Viewed
Milwaukee® 49-57-1250 Annular Cutter, 1-1/4 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 1-1/4 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 1-1/4 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
United Abrasives-SAIT 1AX Blue Line™ 57210 Portable Semi-Friable Coated Abrasive Belt, 3 in W x 21 in L, 220 Grit, Very Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
United Abrasives-SAIT 1AX Blue Line™ 57210 Portable Semi-Friable Coated Abrasive Belt, 3 in W x 21 in L, 220 Grit, Very Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
Proto® J1214SPL Combination Wrench, Imperial, 7/16 in, 12 Points, 15 deg Offset, 6-29/32 in OAL, Alloy Steel, Full Polished, ASME B107.100
Proto® J1214SPL Combination Wrench, Imperial, 7/16 in, 12 Points, 15 deg Offset, 6-29/32 in OAL, Alloy Steel, Full Polished, ASME B107.100
3/8" X 5" CORRUGATED JOINT FASTENER 30 PER BOX-JWH723630 >
Eklind® 21171 Classic Short Key Set, 7 Pieces, 1.5 to 6 mm Hex, Torx® Drive, Foldable Handle, ANSI B18.3, Black Oxide
Eklind® 21171 Classic Short Key Set, 7 Pieces, 1.5 to 6 mm Hex, Torx® Drive, Fold-Up Handle Handle, ANSI B18.3, Black Oxide
GEARWRENCH® 81667 Long Length Open End Combination Wrench, 10 mm Wrench, 12 Points, 15 deg Offset, 166 mm OAL, Premium Alloy Steel, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
