Irwin® 49914 I-100 Full Length Auger Bit, 7/8 in Dia, 7-1/2 in OAL, 4-1/2 in L Spiral Flute, 5/16 in Shank
This IRWIN Power Drill I-100 Auger Drill Bit has a solid-center design to provide added rigidity while boring. The wide lands on these drill bits keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the auger bit and away from the outside diameter, producing a faster, cleaner cut. Each step drill bit has a single-spur cutting edge that scribes the circumference of the hole for a smoother finish. These IRWIN drill bits have a full-length heat treatment to guard against bending in heavy-duty applications.
-
BrandIrwin®
-
UPC024721100153
-
Manufacturer Part Number49914
-
CountryUSA|Canada
-
FinishUncoated
-
MaterialHSS
-
Flute Length4-1/2 in
-
Flute TypeSpiral
-
TypeFull Length
-
SeriesI-100
-
Shank Size5/16 in
-
Cutting DirectionRight Hand
-
Cutting Edge MaterialHSS
-
Shank TypeHex/Straight
-
Diameter7/8 in
-
Drill StyleAuger
-
Overall Length7-1/2 in
- Solid center design provides extra rigidity while boring
- Wide lands keep the bit straight as it bores through the hole
- The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter, producing a faster, cleaner cut
- Single spur cutting edge scribes the circumference of the hole for a smoother finish
- Coarse screw point provides fast boring in hard and soft woods
- Full-length heat treated bit guards against bending in heavy duty applications and strengthens the twist where the greatest strain occurs
- Screw+spur+cutter point shape, CW spiral angle
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 05528377 |
| Fastenal | 0237551 |
| Grainger | 35T753 |
| 309826 |
-
UNSPSC27111509
-
Catalog
Recently Viewed
Irwin® 49914 I-100 Full Length Auger Bit, 7/8 in Dia, 7-1/2 in OAL, 4-1/2 in L Spiral Flute, 5/16 in Shank
This IRWIN Power Drill I-100 Auger Drill Bit has a solid-center design to provide added rigidity while boring. The wide lands on these drill bits keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the auger bit and away from the outside diameter, producing a faster, cleaner cut. Each step drill bit has a single-spur cutting edge that scribes the circumference of the hole for a smoother finish. These IRWIN drill bits have a full-length heat treatment to guard against bending in heavy-duty applications.
1" TRANSFER PUNCH-PDTKH50064 >
30-AMP SCREW-IN FUSES -EDITL30 >
Drillco 1308A116 1308 Imperial Extra Length Drill, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 8 in OAL, HSS
For deep hole drilling. 8" overall length. These drills are made with a general purpose flute design which will perform well under the widest range of operating conditions and materials. Long flutes allow better chip evacuation in deeper holes.
Milwaukee® 2922-22 M18™ FORCE LOGIC™ Press Tool With ONE-KEY™ 1/2 to 2 in CTS Jaws, 1/2 to 4 in Capacity, 18 V, Li-Ion Battery
The MILWAUKEE® M18™ FORCE LOGIC™ Press Tool with ONE-KEY™ with 1/2"-2" CTS Jaws is the industry’s first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all Milwaukee press tools, the in-line design with a forward hand position unlocks the ability to press with one hand and will fit nearly anywhere an arm can fit. Equipped with REDLINK™ electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can’t complete. This press tool is ONE-KEY™ enabled, logging, and uploading data from every press for retrieval via the ONE-KEY™ desktop or mobile app. This allows for performance monitoring and provides peace of mind in quality connections. With ½” to 4” capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors. This kit includes two M18™ REDLITHIUM™ CP2.0 battery packs, 1/2 in., 3/4 in., 1 in., 1 1/4 in, 1 1/2 in., and 2 in. jaws, and a carrying case.
AA-51 JASON INDUSTRIAL INC.
DOUBLE-V V-BELTS-JASAA51>
