Irwin® 326024 Percussion Rotary Hammer Drill Bit, 7/8 in Drill Bit, 1/2 in Straight Shank, 3 in D Cutting, Carbide Cutting Edge, 6 in OAL
Built to withstand demanding materials, the 7/8 in. x 3 in. x 6 in. Rotary Percussion Drill Bit is made of copper braze material for high heat resistance. The chrome-vanadium spring steel shaft adds durability for extended bit lifetime and the double-ground, extra-deep flute removes debris fast for increased visibility. This bit works in hammer drills with a 3-jaw or Jacobs chuck.
-
BrandIrwin®
-
UPC024721009289
-
Manufacturer Part Number326024
-
CountryUSA|Canada
-
MaterialChrome Vanadium Spring Steel
-
Flute Length3 in
-
Flute TypeSpiral
-
TypePercussion
-
Applicable MaterialsMasonry
-
Number of Flutes1
-
Cutting Depth3 in
-
Shank Size1/2 in
-
Cutting DirectionRight Hand
-
Cutting Edge MaterialCarbide
-
Shank TypeStraight
-
Drill Bit FunctionDrilling
-
Drill Bit Size7/8 in
-
Overall Length6 in
- Fits all hammer drills with 3-jaw or Jacobs chuck
- Chrome vanadium shaft through hardened to 50 to 53 HRC
- Patented flute geometry removes dust from the hole quicker for fast drilling and long life
- Up to 150% faster than other competitive bits
- Shot peened, double tempered finish reduces breakage
- Hot isostatically pressed to extend life and resist breakage
- Copper braze material gives high heat resistance for reduced tip loss
-
UNSPSC27111543
-
Standards/ApprovalsANSI Specified
-
Catalog
Recently Viewed
Irwin® 326024 Percussion Rotary Hammer Drill Bit, 7/8 in Drill Bit, 1/2 in Straight Shank, 3 in D Cutting, Carbide Cutting Edge, 6 in OAL
Built to withstand demanding materials, the 7/8 in. x 3 in. x 6 in. Rotary Percussion Drill Bit is made of copper braze material for high heat resistance. The chrome-vanadium spring steel shaft adds durability for extended bit lifetime and the double-ground, extra-deep flute removes debris fast for increased visibility. This bit works in hammer drills with a 3-jaw or Jacobs chuck.
Milwaukee® 48-25-5220 7-Piece Blade Replacement Kit, For Use With SwitchBlade™ 1-3/8 in Self-Feed Drill Bit
Keep all the tools to change your SWITCHBLADE™ in this handy, self-contained storage case. The SWITCHBLADE™ replacement kit includes three replacement blades, one feed screw, two set screws, and an integrated hex wrench. 1-3/8 in. SWITCHBLADE™ 3 blade replacement kit come with: (3) 1-3/8 in. SWITCHBLADE™ Selfeed bit blades, (1) feed screw, (2) set screws, built in hex wrench with storage case.
Irwin® 326019 Percussion Rotary Hammer Drill Bit, 5/8 in Drill Bit, 1/2 in Straight Shank, 3 in D Cutting, Carbide Cutting Edge, 6 in OAL
Power through demanding drilling jobs with the 5/8 in. x 3 in. x 6 in. Rotary Percussion Drill Bit, made from copper braze material for higher heat resistance. With a chrome-vanadium spring steel shaft, this bit has increased durability and a longer bit life. The double-ground, extra-deep flute increases speed and this bit works in hammer drills with a 3-jaw or Jacobs chuck.
ILSCO® ClearChoice® IK-500 Type IK Split Bolt Connector, 250 to 500 kcmil, 8 AWG Compact/Compressed/Concentric/Solid Copper Conductor, 1-5/8 x 3 in, Copper Alloy
ILSCO® ClearChoice® IK-500 Type IK Split Bolt Connector, 250 to 500 kcmil, 8 AWG Compact/Compressed/Concentric/Solid Copper Conductor, 1-5/8 x 3 in, Copper Alloy
Milwaukee® 48-20-6730 4-Cutter Rebar Cutter, 1 in Drill Bit, 0.3937 in Shank SDS Shank, 10 in D Cutting, 12 in OAL
The MILWAUKEE® SDS Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD™ protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8” – 1-1/2”, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS Plus rotary hammers. For use in rebar only.
Milwaukee® M12™ 48-20-7481 2-Cutter Single Tip Rotary Hammer Drill Bit, 9/16 in Drill Bit, 25/64 in SDS-Plus Shank, 4 in D Cutting, Carbide Cutting Edge, 6-1/2 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
