Milwaukee® 48-20-9045 SHOCKWAVE™ Single Ended Hammer Drill Bit, 3/4 in Drill Bit, 3/8 in 3-Flat Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
The MILWAUKEE® Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. The POWER TIP™, available in sizes 3/8" and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a 3-Flat Secure Grip™ shank, Milwaukee® Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with hammer drills/drivers. Available in diameters up to 1 inch.
-
BrandMilwaukee®
-
UPC045242546398
-
Manufacturer Part Number48-20-9045
-
CountryUSA|Canada
-
Flute Length4 in
-
Flute TypeWide
-
TypeSingle Ended
-
Applicable MaterialsConcrete, Brick and Block
-
SeriesSHOCKWAVE™
-
Cutting Depth4 in
-
Shank Size3/8 in
-
Cutting Edge MaterialCarbide
-
Shank Type3-Flat
-
Drill Bit FunctionPercussion
-
Drill Bit Size3/4 in
-
Overall Length6 in
- POWER TIP with dynamic cutting edges provides ultimate material disruption for increased productivity
- Precision ground carbide tip design for up to 4x faster speeds in concrete
- Start to Finish
- Chip Breaker disperses material load throughout tip for balanced drilling experience
- Sharpened carbide edges for faster starts and less bit walking
- 3-Flat Secure Grip prevents bit from slipping in chuck
- Wide flute design for fast, efficient dust removal and more holes per charge
- Hammer drill bits available in diameters 1/8 in to 1 in
-
Alternative Part Number16713250
-
UNSPSC20111614
-
IDEA Index ID16713250
-
Package DescriptionEACH
-
WarrantyNo Warranty
Recently Viewed
Milwaukee® 48-20-9045 SHOCKWAVE™ Single Ended Hammer Drill Bit, 3/4 in Drill Bit, 3/8 in 3-Flat Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
The MILWAUKEE® Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. The POWER TIP™, available in sizes 3/8" and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a 3-Flat Secure Grip™ shank, Milwaukee® Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with hammer drills/drivers. Available in diameters up to 1 inch.
metabo® 688065000 4-Cutter Hammer Drill Bit, 1/8 in Drill Bit, SDS-Plus Shank, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
metabo® 688065000 4-Cutter Hammer Drill Bit, 1/8 in Drill Bit, SDS-Plus® Shank, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
Milwaukee® 48-25-1372 Standard Self-Feed Bit, 1-3/8 in Dia, 6 in OAL, 7/16 in Shank
Milwaukee® Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. Two feed screws are included.
Milwaukee® 48-20-6727 4-Cutter Rebar Cutter, 7/8 in Drill Bit, 0.3937 in Shank SDS Shank, 12 in D Cutting, 12 in OAL
The MILWAUKEE® SDS Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD™ protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8” – 1-1/2”, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS Plus rotary hammers. For use in rebar only.
Milwaukee® M12™ 48-20-7831 2-Cutter Rotary Hammer Drill Bit, 1/4 in Drill Bit, SDS-Plus Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Milwaukee® 48-20-6722 Drill Bit, 3/4 in Drill Bit, 3/4 in Shank SDS-Plus Shank, 16 in D Cutting, 18 in OAL
The MILWAUKEE® SDS Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD™ protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8” – 1-1/2”, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS Plus rotary hammers. For use in rebar only.
