Milwaukee® 48-20-9010 SHOCKWAVE™ Single Ended Hammer Drill Bit, 1/4 in Drill Bit, 1/4 in Hex Shank, 2 in D Cutting, Carbide Cutting Edge, 4 in OAL
The MILWAUKEE® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.
-
BrandMilwaukee®
-
UPC045242316267
-
Manufacturer Part Number48-20-9010
-
CountryUSA|Canada
-
Flute Length2 in
-
Flute TypeWide
-
TypeSingle Ended
-
Applicable MaterialsConcrete, Brick and Block
-
SeriesSHOCKWAVE™
-
Cutting Depth2 in
-
Shank Size1/4 in
-
Cutting Edge MaterialCarbide
-
Shank TypeHex
-
Drill Bit FunctionPercussion
-
Drill Bit Size1/4 in
-
Overall Length4 in
- Precision ground carbide tip design for up to 4x faster speeds in concrete
- Sharpened carbide edges for faster starts and less bit walking
- Wide flute design for fast, efficient dust removal and more holes per charge
- hex shank for added tool versatility
- SHOCKWAVE Impact Duty hammer drill bits available in diameters 1/8 in to 1/2 in
- 1/4 in hex shank for added tool versatility
- Shockwave Impact Duty hammer drill bits available in diameters 1/8 in to 1/2 in
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 818MX1 |
-
Alternative Part Number16713233
-
UNSPSC20111614
-
IDEA Index ID16713233
-
Package DescriptionEACH
-
WarrantyNo Warranty
Recently Viewed
Milwaukee® 48-20-9010 SHOCKWAVE™ Single Ended Hammer Drill Bit, 1/4 in Drill Bit, 1/4 in Hex Shank, 2 in D Cutting, Carbide Cutting Edge, 4 in OAL
The MILWAUKEE® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.
Milwaukee® 48-25-3001 Heavy Duty Standard Self-Feed Bit, 3 in Dia, 6 in OAL, 7/16 in Shank
Milwaukee® Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. Two feed screws are included.
Milwaukee® 48-20-8026 M/2™ 2-Cutter Rotary Hammer Drill Bit, 6 mm Drill Bit, Spear Cutting, 3/8 in SDS-Plus Shank, 250 mm D Cutting, Carbide Cutting Edge, 310 mm OAL
Milwaukee® M/2™ 2-cutter SDS-Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Bostitch® STCR50199/16-1 STCR 2619 Heavy Duty Staples, 9/16 in L Leg, Chisel Point, High Carbon Steel, 7/16 in W Crown
Each fastener is engineered for optimal performance. 9/16" Power Crown Staple. Comes with 1,000 per pack. Fits Bostitch #PC1000, #PC2K, #PC4000, #PC5000, #H30-8, True Value #803-745 and #T5-8 Staplers. Comes with 1,000 staples per pack. Has a rugged, coated finish which strengthens and protects the nail from rust and decay. Made with the highest quality.
Milwaukee® 48-25-1502 Heavy Duty Standard Self-Feed Bit, 1-1/2 in Dia, 6 in OAL, 7/16 in Shank
Milwaukee® Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. Two feed screws are included.
Lincoln® 90776 Easy Out Grease Fitting Tool, 1/8 in Thread Size
A combination tool used to remove worn or broken fittings and to retap holes for installation of new fittings. Tool contains sockets for removing both straight and angle fittings. May also be used to remove old pin-type fittings.
