MORSE C/Tool 1/4" CARBIDE NC SPOTTING DRILL 120 MCT 92955
MORSE® 92955 1440T NC Spotting Drill, 1/4 in Dia, 2-1/2 in OAL, Micrograin Solid Carbide, AlTiN Coated
-
BrandMORSE®
-
UPC686125929558
-
Manufacturer Part Number92955
-
CountryUSA
-
FinishAlTiN Coated
-
Point Angle120 deg
-
MaterialMicrograin Solid Carbide
-
Flute Length3/4 in
-
Applicable MaterialsTough, High Tensile Strength Materials
-
Series1440T
-
Number of Flutes2
-
Cutting Depth3/4 in
-
Shank Size1/4 in
-
Cutting DirectionRight Hand
-
Cutting Edge MaterialMicrograin Solid Carbide
-
Shank TypeStraight
-
Diameter1/4 in
-
Overall Length2-1/2 in
- Provides a more accurate and faster spotting location for follow up drilling
- Eliminates wandering
- Solid carbide offers higher cutting speeds, high rigidity, excellent hardness, wear resistance and heat resistance and long tool life
- Recommended for drilling tough, high tensile strength materials and materials that generate higher cutting temperatures
-
UNSPSC23241605
-
Package Description1/PK
-
Catalog
Recently Viewed
MORSE® 92955 1440T NC Spotting Drill, 1/4 in Dia, 2-1/2 in OAL, Micrograin Solid Carbide, AlTiN Coated
40-B-24-F1.3/16 24 Tooth Sprockets For #40 Chain-idc40b24f1.
24 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B24F1.3/16 >
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
MVP® sheaves are a series of angular faced center flanges which are bolted to the fixed flange mounted on the barrel. They also contain another series of angular faced flanges which are bolted to the end flange and threaded locking collar. When the threaded locking collar is turned clockwise, it moves the angular flanges closer together increasing the pitch diameter. When the collar is moved counterclockwise, the flanges are moved apart, decreasing the pitch diameter. The pitch diameter is infinite. This means the collar adjustment can be turned and stopped at any time regardless of location between the minimum and the maximum setting. When the desired diameter is obtained, the locking collar is locked by tightening screws. In contrast VL, VP, and VM sheaves are limited by half- turn or 180 deg adjustment points.
#10 (.190" ) DIAMETERX1/2" SOCKET HEAD CAP SCREWS-HOL73036 >
17-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-17-F-1-1/8
17 TOOTH SPROCKETS FOR #60 CHAIN
