10HTL-1310 Dodge® 015804 Tire Taper-Lock Bushed Raptor Coupling Hub, E10 Coupling, 1.44 in Dia Bore, 1.88 in L Through Bore, 3.3 in Dia Hub, Steel
10HTL-1310 Dodge® 015804 Tire Taper-Lock Bushed Raptor Coupling Hub, E10 Coupling, 1.44 in Dia Bore, 1.88 in L Through Bore, 3.3 in Dia Hub, Steel
-
BrandDodge®
-
UPC782477277863
-
Manufacturer Part Number015804
-
CountryUSA
-
MaterialSteel
-
Maximum Speed7500 rpm
-
TypeTire Taper-Lock Bushed
-
Coupling SizeE10
-
Hub Diameter3.3 in
-
Length Through Bore1.88 in
-
Bore Diameter1.44 in
- Suited for any application, hubs are reversible to accommodate a wide range of shaft gaps
- Interchangeable hubs are used for both close-coupled and spacer designs for reduced inventory
- Reduced maintenance time and costs
- Easy and intuitive removal method
- Minimal shaft damage
- Clean and compact design
- Dodge® original design, an industry standard for over 50 years
- Combine with diamond Dodge® integral key bushings for added value and convenience
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 112293017 |
| Motion Industries | 06958737 |
-
Alternative Part Number10HTL-1310
-
UNSPSC31163012
-
Standards/ApprovalsATEX|CE Certified
-
Specification Sheet
-
Catalog
Recently Viewed
10HTL-1310 Dodge® 015804 Tire Taper-Lock Bushed Raptor Coupling Hub, E10 Coupling, 1.44 in Dia Bore, 1.88 in L Through Bore, 3.3 in Dia Hub, Steel
10HTL-1310 Dodge® 015804 Tire Taper-Lock Bushed Raptor Coupling Hub, E10 Coupling, 1.44 in Dia Bore, 1.88 in L Through Bore, 3.3 in Dia Hub, Steel
FIELD STATIONS (120.7CU/FT) -KNA11901 >
Edison TJN110 Very Fast Acting Fuse, 110 A, 300 V AC, 200 kA Interrupt, T Class
Edison's Class T current-limiting, fast-acting fuses. Provides 10X better current limitation to help prevent equipment damage caused by short-circuit events. 200 kA Interrupting rating complies with NEC Section 110.9 for today’s large capacity systems. Small, space-saving fuses provide a high degree of current limitation on short-circuits for excellent component protection.
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This one pole definite purpose contactor has a full load rating of 30 ampere and a resistive rating of 40 amperes. The nonreplaceable coil is available with a variety of coil voltages. This device has a 110/120 VAC 50/60 Hz coil. The contactor has straight through wiring. Contactor is 2.00 inches by 3.29 inches and 2.39 tall. These contactors are UL Listed and CSA Certified.
Electroline 548810000 Threaded Intermediate Metal Conduit, 3/4 in Trade, 0.863 in ID x 1.029 in OD, 10 ft L, Steel
Intermediate metal conduit (IMC) weighs approximately 33% less than rigid metal conduit (RMC), so it keeps your customers' costs down and productivity up. Like rigid conduit, it shields against EMI, offers reduced exposure to EMF, and provides an excellent electrical path to the ground, which is recognized as an equipment grounding conductor by the National Electrical Code® (NEC).
ANTI-SKID PLATES BX/125-PAK005493 >
