Browning® 1235852 Split Taper® Bushed Sleeve Coupling, 3/4 to 2-11/16 in Dia Bore, 4-3/8 in OD, 6-1/16 in OAL, 1216.666667 ft-lb Torque
Browning® 1235852 Split Taper® Bushed Sleeve Coupling, 3/4 to 2-11/16 in Dia Bore, 4-3/8 in OD, 6-1/16 in OAL, 1216.666667 ft-lb Torque
-
BrandBrowning®
-
UPC662289179749
-
Manufacturer Part Number1235852
-
CountryUSA
-
FinishPlain
-
MaterialBar Steel
-
Torque Rating1216.666667 ft-lb
-
TypeSplit Taper? Bushed
-
Outside Diameter4-3/8 in
-
Length Through Bore5-1/2 in
-
Bore Diameter3/4 to 2-11/16 in
-
Overall Length6-1/16 in
- High torque capacity
- Excellent balance characteristics
- Without keyway
- Accepts Split, Keyed Bushings bored for shaft
-
Alternative Part NumberCS Q
-
UNSPSC31163003
-
Package DescriptionEACH
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Browning® 1235852 Split Taper® Bushed Sleeve Coupling, 3/4 to 2-11/16 in Dia Bore, 4-3/8 in OD, 6-1/16 in OAL, 1216.666667 ft-lb Torque
Browning® 1235852 Split Taper® Bushed Sleeve Coupling, 3/4 to 2-11/16 in Dia Bore, 4-3/8 in OD, 6-1/16 in OAL, 1216.666667 ft-lb Torque
1-1/4" -FEMALE PIPE THREADX1" -FEMALE PIPE THREAD GALVANIZED REDUCER-JPW11/4X1GR >
1-1/4"-ID SPH/OD INSERT BEARINGS-FAFG1104LRRB>
BBI 389200 Extra Heavy Flat Washer, 7/16 in, Medium Carbon Steel
Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size
Milwaukee® 49-57-1127 Tang Drive Annular Cutter, 1-1/8 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1-1/8 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
