Percision .010" 3" X 3" SLOT S/S SHIM--PK/20 PRC 42330
PPI® 42330 Standard End Stand, For Use With CEMA Series E Idler, 13/16 in Slot, 9 in W Bolt Hole Spacing
-
BrandPPI®
-
Manufacturer Part Number42330
-
CountryUSA
-
TypeStandard
-
Dimensions4-1/2 in H x 12 in W x 1/4 in THK
-
Specifications13/16 in Slot, 9 in Width Bolt Hole Spacing
-
Suitable For Use WithCEMA Series E Idler
-
UNSPSC24101700
-
Catalog
Recently Viewed
PPI® 42330 Standard End Stand, For Use With CEMA Series E Idler, 13/16 in Slot, 9 in W Bolt Hole Spacing
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
WATTS® Maxi-Flo® 0555180 Silent Check Valve, 2 in Nominal, Thread End Style, Cast Copper Silicon Alloy Body
This 2 inch lead free Maxi-Flo check valve is used in general industrial and plumbing applications to prevent the effects of water hammer in the piping system. It provides a silent operation with low pressure drop and can be installed horizontally or vertically. This valve consists of a lead free brass body, lead free brass check and adapter, conical lead free brass disc, PTFE seat and threaded end connections. The maximum working pressure rating is 400 psi (27.6 bar), WOG non-shock at minus 20 to 100 degrees F (minus 29 to 38 degrees C) and 15 psi (1 bar) WSP at 250 degrees F (121 degrees C).
V-BELTOUTSIDE CIRCUMFERENCE >208-JASB205 >
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
8' X 10' BLUE POLY TARP-TABIT810 >
