Liquid Tight Flexible Non-Metallic Conduit
Ultratite® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.
Ultratite® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.
Southwire® Ultratite® 55094401 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1 in Trade, 1.041 to 1.066 in ID x 1.303 in OD, 100 ft Coil L, PVC
The Southwire Company LiquidTite 1 in. x 100 ft. Non-Metallic Conduit is a flexible housing for electrical wire the provides impact protection in encased concrete or direct burial installations. This conduit is UL listed, CSA certified, green Spec and RoHS compliant. It helps protects electrical cables in burial and concrete applications.
Southwire® Ultratite® 55094502 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1-1/4 in Trade, 1.38 to 1.41 in ID x 1.645 in OD, 100 ft L, PVC
Ultratite Liquidtight Flexible Nonmetallic Conduit is used for the installation and protection of electrical conductors. It protects the conductors where the conditions of installation, operation or maintenance require flexibility or protection from liquids, vapors, solids or weather. It is suitable for use in exposed or concealed installations and can be used for direct burial and encased in concrete.
Southwire® Ultratite® 55094601 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1-1/2 in Trade, 1.575 to 1.6 in ID x 1.883 in OD, 50 ft L, PVC
Southwire® Ultratite® 55094601 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1-1/2 in Trade, 1.575 to 1.6 in ID x 1.883 in OD, 50 ft L, PVC
Southwire® Ultratite® 55094801 Type NM Liquid Tight Flexible Non-Metallic Conduit, 2 in Trade, 2.02 to 2.045 in ID x 2.358 in OD, 50 ft L, PVC
Ultratite Liquidtight Flexible Nonmetallic Conduit is suitable for the installation and protection of electrical conductors in circuits of 600 Volts nominal, or less. It may be used for Motor circuits - for conductors of motor feeders, branch and control circuits. Where the conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather. It may also be used in agricultural buildings under exposed or concealed installations.
Southwire® Ultratite® 58046201 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1/2 in Trade, 0.622 to 0.642 in ID x 0.83 in OD, 100 ft L, PVC
This Southwire Ultratite 1/2 in. x 100 ft. Flexible Non-Metallic Conduit features a liquid-tight design ideal for protection from liquids, vapors, solids and weather. This product is ideal for installation, operation or maintenance that requires high flexibility. Made with a smooth metal interior for easy wire pulling.
Recently Viewed
Morse® 177160 MHS Advanced Hole Saw, 1 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 1/2-20 Arbor
The all new advanced bi-metal hole saw by M.K. Morse®. Our latest sawing innovation replaces all current Morse bi-metal hole saw solutions into one, simple optimized powerhouse. Arbor required.
Irwin® Hanson® 53601 536 ST-1 Straight Screw Extractor, ST-1 Extractor, 9/64 in Drill, For Screw Size: 3/16 to 5/16 in, #10
IRWIN Straight Flute Screw Extractors - 536/526 Series.
Morse® 177962 MHS Advanced Hole Saw, 6 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
The all new advanced bi-metal hole saw by M.K. Morse®. Our latest sawing innovation replaces all current Morse bi-metal hole saw solutions into one, simple optimized powerhouse. Arbor required.
Hougen® 11016 Arbor Assembly With Set Screws and Spring, 3/4 in Triple Flatted Shank
Drillco 73A108C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
AIR FILTER-WIX42919>
