Titan2™ 55093801 Type EF General Purpose Liquid Tight Flexible Metal Conduit, 1/2 in Trade, 0.622 to 0.642 in ID x 0.844 in OD, 100 ft Coil L, Steel
Titan2™ 55093801 Type EF General Purpose Liquid Tight Flexible Metal Conduit, 1/2 in Trade, 0.622 to 0.642 in ID x 0.844 in OD, 100 ft Coil L, Steel
-
BrandSouthwire®
-
UPC032886042669
-
Manufacturer Part Number55093801
-
CountryUSA
-
Temperature Rating14 to 140 deg F
-
FinishGalvanized
-
MaterialSteel
-
FlexibilityExtra Flexible
-
Trade Size1/2 in
-
ColorGray
-
TypeType EF General Purpose
-
Inside Diameter0.622 to 0.642 in
-
Bend Radius6-1/2 in
-
Outside Diameter0.844 in
-
Length100 ft
- Delivers wiring protection where listed products are not required
- For exposed or concealed installations requiring movement crossover connections or tight bends
- Requires standard liquid tight fittings
-
Alternative Part Number8872229
-
UNSPSC39131706
-
IDEA Index ID8872229
-
Package DescriptionEACH
-
Standards/ApprovalsPROP65: WARNING: This product contains material that, the State of California has determined, may cause reproductive harm. www.P65Warnings.ca.gov/product|REACH Compliant|ARRA Compliant|Buy American Act Compliant
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Titan2™ 55093801 Type EF General Purpose Liquid Tight Flexible Metal Conduit, 1/2 in Trade, 0.622 to 0.642 in ID x 0.844 in OD, 100 ft Coil L, Steel
Titan2™ 55093801 Type EF General Purpose Liquid Tight Flexible Metal Conduit, 1/2 in Trade, 0.622 to 0.642 in ID x 0.844 in OD, 100 ft Coil L, Steel
Arlington Snap2IT® NMLT905 Form B Push-In Connector With 3/4 in Knockout, 1/2 in Trade, 90 deg, Plastic
Arlington Snap2IT® NMLT905 Form B Push-In Connector With 3/4 in Knockout, 1/2 in Trade, 90 deg, Plastic
The Square D™ by Schneider Electric brand heavy duty safety switch is designed to be tough, reliable and provide exceptional performance in the most gruelling conditions from commercial and institutional to industrial and manufacturing facilities. F Series safety switches provide significantly higher levels of mechanical endurance than NEMA KS-1 or UL98 standards require. The design life of a F Series switch is a minimum of three times the NEMA requirement. An abundance of copper is used in the heaviest current carrying power paths of all Square D™ by Schneider Electric heavy duty safety switches. The more copper for current carrying paths, the lower the temperature rise. Managing temperatures inside the switch is the key to providing greater service life. All heavy duty safety switches feature a quick-make, quick-break operating mechanism, a dual cover interlock and a color coded indicator handle.
Black+Decker® DW3578B10 20™ Portable Round Arbor Thin Kerf Circular Saw Blade, 7-1/4 in Dia x 0.045 in THK, 5/8 in Arbor, Steel Blade, 24 Teeth
Featuring tungsten carbide teeth for maximum durability and a thin kerf for fast, smooth cuts, DEWALT Small Diameter Construction Saw Blades power through a variety of building materials with ease. Ribbed heat vents allow blades to run at cooler temperatures, reducing blade flexing and binding. Anti-stick coating minimizes friction and gum-up.
Schneider Electric's Square D general duty safety switches are designed for residential and light commercial applications where durability and economy are prime considerations. Typical loads include lighting, air conditioning, and appliances. General duty safety switches feature a quick make, quick break operating mechanism. This single throw safety switch is a non fusible disconnect and has a rated current of 100A for 240VAC. This general duty switch has a 3 wire configuration with 3 poles. The enclosure is surface mounted and is a Type 3R with bolt on provisions. General duty safety switches are UL Listed, and meet or exceed the NEMA Standard KS1.
Anvil® 0310030804 FIG 1105 Straight Pipe Tee, 2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
