Carlon® A240D 1-Piece Flexible Quick-Connect ENT Raceway Coupling, 1/2 in, Polycarbonate
Carlon® A240D 1-Piece Flexible Quick-Connect ENT Raceway Coupling, 1/2 in, Polycarbonate
-
BrandCarlon®
-
UPC034481008514
-
Manufacturer Part NumberA240D
-
CountryUSA
-
MaterialPolycarbonate
-
ColorBlue
-
Type1-Piece Flexible Quick-Connect
-
Dimensions1.586 in L
-
Size1/2 in
-
Suitable For Use WithCarlon® 1-1/4 to 2 in Flex-Plus Blue ENT
- Quick-connect couplings and threaded adapters are concretetight when used with Carlon® ENT
-
Alternative Part Number7TAA234030R0012|10737229
-
UNSPSC39131707
-
IDEA Index ID10737229
-
Package DescriptionEACH
-
Standards/ApprovalsUL File No. E86720|CSA 92248
-
Specification Sheet
Recently Viewed
Carlon® A240D 1-Piece Flexible Quick-Connect ENT Raceway Coupling, 1/2 in, Polycarbonate
Carlon® A240D 1-Piece Flexible Quick-Connect ENT Raceway Coupling, 1/2 in, Polycarbonate
BRUSH RESEARCH GBD-7180-SC Heavy Duty Flexible Cylinder Hone, 7 in Dia Bore, 7 in L Abrasive, 17-1/2 in OAL, 180 Grit
The BRM Flex- Hone® Tool is a resilient, flexible honing tool with a soft cutting action. It's unique construction allows the abrasive globules or "stones" to float, assuring the tool will be self-centering, self-aligning to the bore and self-compensating for wear. The tool is available in a variety of different grits and sizes ranging from 4 mm to 36 in. Whether your need is cross hole deburring, surface finishing or edge blending there is a Flex- Hone® Tool designed for you. A non-directional or crosshatched pattern is created on the surface that contains valuable valleys between the plateaus for oil retention. Finer grits can assist with achieving single RA finishes. In Automotive, Hydraulic, Pneumatic or Industrial applications, the Flex- Hone® Tool will provide a superior surface finish bringing increased product performance, longer product life and less product reject.
Littelfuse® POWR-GARD® LRU-213 Fuse Reducer, 250 V AC, 100 to 30 A, Class: H/K5
Littelfuse® POWR-GARD® LRU-213 Fuse Reducer, 250 VAC, 100 to 30 A, Class: H/K5
TCM08111VM>
2" -ID HIGH PILLOW BLOCK UNIT-MBUVPS232S >
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
