Browning® 1111772 Sprocket, 40 Chain, 20 Teeth, For Use With T25L Torque Limiters, 3.45 in OD
Browning® 1111772 Sprocket, 40 Chain, 20 Teeth, For Use With T25L Torque Limiters, 3.45 in OD
-
BrandBrowning®
-
UPC662289222063
-
Manufacturer Part Number1111772
-
CountryUSA
-
Pitch Diameter3.196 in
-
Thickness3/16 to 3/8 in
-
Chain Number40
-
Number of Teeth20
-
Outside Diameter3.45 in
-
Suitable For Use WithT25L Torque Limiters
- Morse and Browning offer a complete line of Torque Overload Devices to protect machinery from overloads or jams
- Stock sprockets supplied with ground faces to fit the Browning torque limiter
- Browning Torq/ Pro overload load clutch is release type ball detent style with single position reset
- Accuracy of trip torque within 10 Percent with max torque range 5270 ft/lbs
- Easy torque setting and adjusting by tightening or loosing adjusting nuts (bolts)
-
Alternative Part Number40T25L20
-
UNSPSC31171901
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
Recently Viewed
Browning® 1111772 Sprocket, 40 Chain, 20 Teeth, For Use With T25L Torque Limiters, 3.45 in OD
Browning® 1111772 Sprocket, 40 Chain, 20 Teeth, For Use With T25L Torque Limiters, 3.45 in OD
Littelfuse® H21706.3P Fast Acting Cartridge Fuse, 6.3 A, 250 V AC, 63 A Interrupt, Cartridge Body
Littelfuse® H21706.3P Fast Acting Cartridge Fuse, 6.3 A, 250 VAC, 63 A Interrupt, Cartridge Body
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning® 1076959 QD Bushing, 1-1/4 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.33 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
BEARING MADE OF WOOD, 3" X 4" X 2-3/8"
-WOOWX3000226 >
Weiler® 15071 Small Diameter Wheel Brush, 1 in Dia Brush, 3/16 in W Face, 0.006 in Dia Crimped Filament/Wire, 1/4 in Arbor Hole
Weiler® 15071 Small Diameter Wheel Brush, 1 in Dia Brush, 3/16 in W Face, 0.006 in Dia Crimped Filament/Wire, 1/4 in Arbor Hole
