Shear Pin Hubs
Browning® 1188242 Type 1 Shear Pin Hub, 3/8 to 1-1/2 in Dia Bore, 5-1/2 in OD Flange, 2-1/4 in L Through Bore
Browning® shear pin hubs are designed to shear a necked pin at a predetermined load. This protects equipment from overloads. Consisting of a hub assembly, a sprocket and shear pin, the shear pin bridges between the sprocket and hub assembly. The shear pin is available in load increments, so the closest one to your application requirements must be chosen. Resetting the shear pin hub is accomplished manually by replacing the shear pin. Best applied to applications where infrequent overloads are encountered. Torque capacity is up to 50720 in-lb.
Browning® 1188259 Type 1 Shear Pin Hub, 1/2 to 1-3/4 in Dia Bore, 7/8 in Dia Hub, 7-5/8 in OD Flange, 2-1/8 in L Through Bore
Browning® shear pin hubs are designed to prevent damage to machinery due to sudden overload or jamming by shearing the necked pin at a predetermined load. The inner part of the hub is keyed to the shaft and remains stationary while the outer part, to which the sprocket is bolted, rotates freely after pin breakage, allowing the drive to idle. Shear pin hubs are ideal for heavily lubricated areas where a cost effective solutions is needed.
Recently Viewed
WALL OR DESK THERMO-HYGROMETER-GNLDTH700 >
5/16" X 2-1/4" USS Stainless Steel Socket Head Capscrew
The Klein Tools Spud Wrench Holder Saves time on the job by keeping tools accessible. It features a convenient belt loop and 2 slots for holding up to 2 wrenches. The holder can also accommodate an adjustable-head construction wrench.
Compact, easy to use set.
Form-fitting storage box to keep set organized.
Proto® TorquePlus™ J1229MASD Anti-Slip Design Combination Wrench, Metric, 29 mm, 12 Points, 15 deg Offset, 15 in OAL, Alloy Steel, Satin, ASME B107.100
Milwaukee® 48-20-9057 SHOCKWAVE™ Masonry Single Ended Drill Bit Set, 5/32 in Min Drill Bit, 3/8 in Max Drill Bit, 7 Pieces, For Use With Hammer Drill Drivers, Carbide
The MILWAUKEE® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. The POWER TIP™, available in sizes 3/8" and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers.
