Browning DYNACORP BRW D-6001-448-006
The D6001-448-006 is a basic on-off power supply that provides full voltage to a 90 VAC clutch or brake and is activated by an external switch. This type of power supply is sufficient for many clutch/brake applications. These on-off controls (6001-448-006) feature 2 channels and an input of 220/240 VAC, 50/60 Hz.
-
BrandWarner Electric®
-
UPC786582079633
-
Manufacturer Part Number6001-448-006
-
CountryUSA
-
TypePlug-In Octal Socket
-
SeriesCBC-801
-
Number of Channels2
-
Dimensions1.968 in L x 2.437 in H
-
Input Voltage220/240 VAC
-
Specifications1.25 A Output Current, 50/60 Hz Frequency, 1.6 A/250 V Circuit Protection, SPDT Switching, -23 to 116 deg F Ambient Temperature
-
Output Voltage90 VDC
-
Suitable For Use With90 VDC Clutches/Brakes and Octal Socket
- Wiring connections made at octal socket
- Arc suppression circuitry extends switch life
- Fused for overload protection
- LED output indicators
- DIN rail mountable
- Red LED indicates brake is energized, green LED indicates clutch is energized
- For basic on-off operation
-
Alternative Part Number30190481
-
UNSPSC26111900
-
Standards/ApprovalsCSA Certified|UL Listed
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
The D6001-448-006 is a basic on-off power supply that provides full voltage to a 90 VAC clutch or brake and is activated by an external switch. This type of power supply is sufficient for many clutch/brake applications. These on-off controls (6001-448-006) feature 2 channels and an input of 220/240 VAC, 50/60 Hz.
13 TOOTH SPROCKETS FOR #50 CHAIN
2-1/2" -FEMALE PIPE THREAD METAL GALVANIZED TEE-FIT21/2GT >
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
Starrett® A1 With Pilot Drill, 1/2-20 Arbor, 1/4 in Drill, 3/8 in Chuck, 11/32 in Hex Shank, For Use With 9/16 in to 1-3/16 in Hole Saw and 3/8 in Chuck, HSS
Hole Saw arbor supplied with 6.35mm (1/4") pilot drill. Shank size 8.75mm (11/32"). Screw thread 1/2"-20. Screw thread 1/2"-20.
12-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-12-F-1-1/8
12 TOOTH SPROCKETS FOR #60 CHAIN
