Wilton® WL9-14836 Fiber Face Magnetic Jaw Cap, For Use With Any Vise, 5 in W Jaw, Aluminum Alloy with Laminated Fiber Cover
Wilton fiber-faced jaw caps consist of an aluminum alloy with laminated fiber cover to prevent the absorption of outside materials. Trust these original Wilton parts when it's time to replace your vise jaw caps.
-
BrandWilton®
-
UPC019907148364
-
Manufacturer Part NumberWL9-14836
-
CountryUSA
-
MaterialAluminum Alloy with Laminated Fiber Cover
-
TypeFiber Face Magnetic
-
Jaw Width5 in
-
Suitable For Use WithAny Vise
- Aluminum alloy with laminated fiber cover to prevent the absorption of outside materials
- Heat parts rapidly by concentrating heat into part
- Use on workpieces to avoid distortion and clamping marks
- Temporary work holding systems
- Designed to protect both the vise jaws and the workpiece from marring and distortion during any clamping application
- Caps are constructed from a hardened aluminum alloy with two built-in circular permanent magnets on the backside which holds the product securely to the vise
- Caps are magnetic towards the vise side to prevent steel filings from attaching themselves to the jaws and keep the clamped part from becoming magnetized
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 41D421 |
| Grainger | 41D421 |
-
Alternative Part Number14836
-
UNSPSC27112818
-
Package Description2/CT
-
Catalog
Recently Viewed
Wilton® WL9-14836 Fiber Face Magnetic Jaw Cap, For Use With Any Vise, 5 in W Jaw, Aluminum Alloy with Laminated Fiber Cover
Wilton fiber-faced jaw caps consist of an aluminum alloy with laminated fiber cover to prevent the absorption of outside materials. Trust these original Wilton parts when it's time to replace your vise jaw caps.
Browning® 1229350 Minimum Plain Bore Straight Tooth Miter Gear, 6 Diametral Pitch, 20 deg Pressure Angle, 24 Teeth, 4 in Dia Pitch, 0.86 in W Face, 1-1/4 to 2 in Dia Bore, Unhardened Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Browning® 767700 VPLE 100 Intermediate Duty Low Base Pillow Block Ball Bearing Unit, 2 in Dia Bore, 6-7/16 to 7-7/16 in L Bolt Center-to-Center, 2-7/16 in Base to Bore Centerline, 8-13/16 in OAL x 4-29/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
MORSE® 29853 1655H Chucking Reamer, 0.626 in Dia x 9 in OAL, 0.5615 in Dia Straight Shank, Straight Flute
MORSE® 29853 1655H Chucking Reamer, 0.626 in Dia x 9 in OAL, 0.5615 in Dia Straight Shank, Straight Flute
Dichtomatik 75115235 O-Ring, 225 Dash Number, 1.859 in ID x 2.137 in OD, PTFE, 55 Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
1/2" CPVC SCH-80 PLASTIC PIPE (FT)-NIBCPVCC80050 >
