Firestop / Duct Seal
Metacaulk® 66640 Intumescent Firestop Sealant, 10.3 oz Cartridge, Paste Form, Red, 1.25
Metacaulk® 1000 is a one component, general purpose fire rated sealant and smoke seal for construction joints and through-penetrations. Metacaulk® 1000 is a water based, extremely intumescent, non-sag caulking grade sealant that is easy to apply as well as to retrofit. It cures to an elastomeric seal that is suitable where dynamic movement is expected. In the event of a fire, Metacaulk® 1000 will prevent the spread of flames, smoke, hot gases and water through joint openings and through penetrations. No dilution or mixing is required for use. No special skills are necessary for installation. Metacaulk® 1000 is applied with a conventional caulking gun, bulk loading gun or can be troweled from the pail. For large applications, it can be pumped directly from the pail. Metacaulk® 1000 systems are rated for 1, 2, 3 and 4 hours in accordance with the ASTM E814 (UL1479),UL 2079 and ULC-S115-95 test standards. Metacaulk® 1000 is protected in a wet stage as well as in a dry stage against mold growth with a combination of biocides.
Gardner Bender DS-110N Duct Seal Compound, 1 lb Pug, Solid Form, Dark Gray, 1.78
Gardner Bender DS-110N Duct Seal Compound, 1 lb Pug, Solid Form, Dark Gray, 1.78
Recently Viewed
Dixon® MA150 King™ Short Shank Suction Coupling, 1-1/2 in Nominal, NPSM End Style, Domestic
Dixon® MA150 King™ Short Shank Suction Coupling, 1-1/2 in Nominal, NPSM End Style, Domestic
5-GAL 40% URETHANE FLOOR FINISH-ML-FC16405GAL >
Milwaukee® 48-20-6727 4-Cutter Rebar Cutter, 7/8 in Drill Bit, 0.3937 in Shank SDS Shank, 12 in D Cutting, 12 in OAL
The MILWAUKEE® SDS Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD™ protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8” – 1-1/2”, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS Plus rotary hammers. For use in rebar only.
Milwaukee® MX4™ 48-20-7357 4-Cutter Rotary Hammer Drill Bit, 3/8 in Drill Bit, 25/64 in, 16 in D Cutting, Carbide Cutting Edge, 18 in OAL
The MILWAUKEE® SDS Plus 4-Cutter MX4™ 3/8" X 16" X 18" Drill Bits with solid head carbide deliver up to 5X longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar with a 4-cutter design that prevents lock-up, reducing downtime. The sharp centering tip offers exact spot drilling in concrete and metal decking. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. A wear mark indicator shows end of life and when bit no longer meets the ANSI requirement. The Milwaukee MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.
10" X 2-1/2" PHENOLIC SWIVEL CASTER-PJCCF1025PH64SCB>
1-GAL OIL-BASED DUST MOP TREATMENT-ML-FC19101GAL >
