Loctite® Chisel® 135544 SF 790™ Paint Stripper, 18 oz Aerosol Can, Liquid Form, Gray to Off-White, Sharp Solvent Odor/Scent
LOCTITE® SF 790™ paint Stripper removes gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scraping and sanding. Works on wood; non-corrosive on aluminum. Not for use on plastics, linoleum, or synthetic fibers
-
BrandLoctite®
-
UPC079340790407
-
Manufacturer Part Number135544
-
CountryUSA|Canada
-
Flash Point41 deg F
-
FormLiquid
-
ColorGray to Off-White
-
CompositionMethanol, Flammable Propellant, Flammable Propellant
-
VOC Content0.3
-
Container Size18 oz
-
Container TypeAerosol Can
-
SeriesSF 790™
-
Specific Gravity0.789
-
Odor/ScentSharp Solvent
- Removing baked-on gaskets and gasket cements from any type of metal surface
- Removing chemical Formedin-place gaskets
- Removing baked-on grease and oil deposits
- Prepares metal parts for new gaskets, eliminating scraping and sanding
- Works on wood
- Non-corrosive on aluminum
- Not for use on plastics, linoleum, or synthetic fibers
- Baked-on gaskets and gasket cements from any type of metal surface
- Chemical formed-in-place gaskets, including RTV silicone and anaerobic materials
- Gaskets from aluminum components without scraping or damaging machine surfaces
- Gaskets from small to difficult-to-reach components
- High temperature engine paints prior to repainting
- Built-up carbon deposits from interior engine/combustion surfaces
- Baked-on grease and oil deposits
- Paint and varnish from wood surfaces
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | LM5079040 |
| Grainger | 4KM53 |
| MSC | 90904947 |
| Fastenal | 62586 |
-
Alternative Part Number79040
-
UNSPSC31211802
-
Package Description1/PK
Recently Viewed
Loctite® Chisel® 135544 SF 790™ Paint Stripper, 18 oz Aerosol Can, Liquid Form, Gray to Off-White, Sharp Solvent Odor/Scent
LOCTITE® SF 790™ paint Stripper removes gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scraping and sanding. Works on wood; non-corrosive on aluminum. Not for use on plastics, linoleum, or synthetic fibers
Dixon® 125-G-BU Cam and Groove Gasket, 1-1/4 in Nominal, 1-3/8 in ID x 1-15/16 in OD x 1/4 in THK, Buna-N
Dixon® 125-G-BU Cam and Groove Gasket, 1-1/4 in Nominal, 1-3/8 in ID x 1-15/16 in OD x 1/4 in THK, Buna-N
The W2208 wood attic ladder has a duty rating of 250 pounds and comes fully assembled and ready to install. Full wrap around door hinge minimizes heat loss. The quality door is ready for staining or painting. The pull string eases the opening and closing. Hinges butt metal to metal to maintain ladder rigidity. Counter-balance mechanism eliminates sag and springiness.
22 TOOTH SPROCKETS FOR #50 CHAIN-BRWH5022X17/16 >
1/4-14X1-1/2 HWH D SCREW-JWH703427>
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 5mm (3/16") Diameter.
