9004 RUSTOLEUM PAINTECONOMY FLAT WHITE SPRAY PAINT
ECONOMY FLAT WHITE SPRAY PAINT-RUS9004 >
Recently Viewed
ECONOMY FLAT WHITE SPRAY PAINT-RUS9004 >
Greenlee® 645-1-3/4 Quick-Change Hole Cutter, 1-3/4 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor
Greenlee® 645-1-3/4 Quick-Change Hole Cutter, 1-3/4 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor
Browning® 1296367 T35L Automatic Torque Limiter, 5/8 in Finished Bore, 3-1/2 in OD, 1800 in-lb (1-Spring)/3000 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
JACKSON SAFETY® 29052 F30 E Shape Bound Face Shield Window, Clear, Acetate, 8 in H 15-1/2 in W 0.04 in THK Visor, For Use With Headgear and Hard Hat Interchange System, ANSI Z87.1, CSA Z94.3
Jackson safety F30 acetate faceshield are designed to provide on-the-job protection from dust and splashes. Made of durable acetate, the face protection shield measures 8 in H x 15.5 in W x 0.04 in Thk and may be used over and over (depending on the task). The clear faceshield allows for maximum light transmission and visibility and is designed for use in light industrial manufacturing, general splash protection, landscaping and food processing. It’s compatible with the hard hat interchange system. It snaps into place on compatible headgear and hard hats - no special tools required. This model is bound with an aluminum brim, for ease of molding it to your chosen headgear
BBI 455578 Partially Threaded Cap Screw, 3/4-16, 7-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455578 Partially Threaded Cap Screw, 3/4-16, 7-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
3-PIECE HOBBY PAINT BRUSHES - JWH970581 >
