Browning CONVEYOR CHAIN SPROCKETS BRW 2040-H-17
Browning® stock sprockets for extended pitch chain have larger pitch diameters than standard roller chain sprockets as extended pitch chain will not operate satisfactorily on standard roller chain sprockets with less than 24 teeth. They will normally operate satisfactorily on standard roller chain sprockets with 24 or more teeth. Sprockets for extended pitch chain with large rollers are available on special order.
-
BrandBrowning®
-
UPC662289250721
-
Manufacturer Part Number1173400
-
CountryUSA
-
Bushing TypeType H Split Taper
-
Pitch1 in
-
Pitch Diameter2.7682 in
-
MaterialSteel
-
Chain Size2040
-
TypeSingle Strand
-
Hub Diameter2-1/2 in
-
Number of Teeth17
-
Outside Diameter2.975 in
-
Length Through Bore1-1/4 in
-
Bore Diameter3/8 to 1-1/2 in
- Easy installation and removal
- Hardened teeth at no extra cost drive sizes up to 30 teeth on 35 through 160 chain
- External key have higher torque capacity, aligns bolt holes
- Provides key to key drive
- Solid flange true concentricity, easy installation
- Longer barrel have better support on the shaft
- This Product has the Browning Exclusive Twice the Life Guarantee
- Split Taper Bushing are available in popular Inch, Metric and Spline bore
-
Alternative Part Number2040H17
-
UNSPSC31171901
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
-
Catalog
Recently Viewed
Browning® stock sprockets for extended pitch chain have larger pitch diameters than standard roller chain sprockets as extended pitch chain will not operate satisfactorily on standard roller chain sprockets with less than 24 teeth. They will normally operate satisfactorily on standard roller chain sprockets with 24 or more teeth. Sprockets for extended pitch chain with large rollers are available on special order.
FYH® UCP207 35MM UCP Normal Duty Pillow Block Unit, 35 mm Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL 3-3/4 in OAH
FYH® UCP207 35MM UCP Normal Duty Pillow Block Unit, 35 mm Dia Bore, 5 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL 3-3/4 in OAH
ISOSTATIC™ Oilube® 401375 Round Bore Sleeve Bearing, 1-1/8 in Dia Bore, 1-3/8 in OD, 2-1/2 in W
ISOSTATIC™ Oilube® 401375 Round Bore Sleeve Bearing, 1-1/8 in Dia Bore, 1-3/8 in OD, 2-1/2 in W
Milwaukee® 2953-20 M18 Brushless Compact Impact Driver, 1/4 in Drive Hex Drive, 2000 in-lb Torque Rating
The MILWAUKEE® M18 FUEL™ ¼” Hex Impact Driver is the Most POWERFUL and FASTEST DRIVING impact driver, featuring ULTIMATE TRIGGER CONTROL. MILWAUKEE® POWERSTATE™ Brushless motor delivers unmatched power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control. MILWAUKEE® REDLINK PLUS™ intelligence delivers ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. MILWAUKEE® M18™ REDLITHIUM™ Battery Packs deliver more work per charge and more work over the life of the pack. Featuring 4-mode drive control provides users with greater control over output speed and power. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. This new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows. The M18 FUEL ¼” Hex Impact Driver is part of MILWAUKEE® M18 system which is fully compatible with over 200+ solutions.
ISOSTATIC™ Oilube® 401049 Round Bore Sleeve Bearing, 5/16 in Dia Bore, 3/8 in OD, 1/2 in W
ISOSTATIC™ Oilube® 401049 Round Bore Sleeve Bearing, 5/16 in Dia Bore, 3/8 in OD, 1/2 in W
BBI 847327 Partially Threaded Cap Screw, 1/2-13, 6-1/2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847327 Partially Threaded Cap Screw, 1/2-13, 6-1/2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
