Browning 14-TOOTH G-BUSH #40 CHAIN SPROCKET BRW H-40-G-14
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
-
BrandBrowning®
-
UPC662289284672
-
Manufacturer Part Number1176916
-
CountryUSA
-
Bushing TypeType 3 Split Taper
-
Pitch1/2 in
-
Pitch Diameter2.247 in
-
MaterialSteel
-
Chain Size#40
-
TypeSingle Strand
-
Hub Diameter2.015 in
-
Number of Teeth14
-
Outside Diameter2.491 in
-
Length Through Bore1.026 in
-
Bore Diameter3/8 in
- This product has the Browning® exclusive twice the life guarantee
- Easy installation and removal
- External key higher torque capacity, aligns bolt holes
- Provides key-to-key drive
- Double split barrel improved clamping
- Solid flange true concentricity
- Longer barrel better support on the shaft
- For use with 1/2 in pitch ANSI chain
- Split Taper Bushing are available in popular Inch, Metric and Spline bore
- Hardened Teeth at No Extra Cost - Drive Sizes up to 30 teeth on 35 through 160 Chain
-
Alternative Part NumberH40G14
-
UNSPSC31171900
-
Package DescriptionEACH
-
Standards/ApprovalsANSI Specified
-
Warranty1 Year
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Browning 14-TOOTH G-BUSH #40 CHAIN SPROCKET BRW H-40-G-14
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
CL-3108-10-04 COILHOSE Type: Male Swivel Branch TeeTube Connection Size: 10 mm Tube Outer Diameter (OD)Thread Connection Size: 1/2" Male BSPT (British Standard Pipe Taper)Body Material: PlasticTubing Compatibility: Polyurethane, Nylon, a
Brand: Coilhose Pneumatics Part Number: CL31081004Fitting Type: Push-to-connect male branch tee with swivel Tube Size: 10 mm O D Thread Size: 1/4" Male BSPT Material: Composite/plastic body Tubing Compatibility: Designed for use with polyurethane, nylon, and polyethylene plastic tubing
The Crosby H-330 5/8" is a heavy-duty, forged carbon steel clevis grab hook designed primarily for tie-down and load securement applications. It is engineered to pair with 5/8" Grade 40 (High Test) or Grade 43 industrial chain (often referred to by Crosby as Spectrum 4® chain).
Leviton® Black & White® CS6365C Grounding Locking Plug, 125/250 V AC, 50 A, 3 Poles, 4 Wires, Black/White
Leviton® Black & White® 50 A non-NEMA line of industrial grade locking blade devices feature rugged construction that resists impact, sunlight, chemicals and rough use. All contacts and blades are solid 1-piece construction for superior conductivity. Corrosion resistant versions feature nickel plated contacts and blades, plus stainless steel shrouds and screws. The ergonomic, fluted-body design with radial gripping edge is ideal for gripping and pulling. The unique cord clamp accepts a wide range of cord sizes, providing a secure grip without damaging the cord. And, they are backed by a limited lifetime warranty.
Hougen® Rotabroach® 12246 12000 Annular Cutter, 1-7/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
IKO CRY32VUU Inch Series Non-Separable Uncaged Roller Follower With Cylindrical Outer Ring, Inner Ring and Oil Hole, 5/8 in Dia Bore, 2 in Dia x 1-1/4 in W Roller, 45700 N Dynamic/80600 N Static Load, High Carbon Steel Roller
IKO manufacturers a variety of durable Roller Followers that feature needle rollers embedded in a thick outer ring, specifically designed for smooth outer ring rotation. Crowned and cylindrical outer ring styles meet a diverse range of application needs. Outer rings run directly on mating track surfaces.
