Browning 15-TOOTH #60-1 CHAIN SPROCKETS BRW H-6015 X 1-1/4
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
-
BrandBrowning®
-
UPC662289233038
-
Manufacturer Part Number1128180
-
CountryUSA
-
Pitch1/2 in
-
Pitch Diameter2.405 in
-
MaterialSteel
-
Chain Size#40
-
TypeSingle Strand Finished Bore Type 1
-
Hub Diameter2-1/16 in
-
Number of Teeth15
-
Keyway Size1/4 x 1/8 in
-
Outside Diameter2.652 in
-
Length Through Bore0.891 in
-
Bore Diameter1-1/4 in
- Furnished with standard keyway on centerline of tooth and hollow head setscrew over keyway
- In-stock hardened sprockets are warranted to last at least twice as long as the standard (unhardened) mild steel sprockets they replace
- For use with 1/2 in pitch ANSI chain
- Additional setscrew at 90 deg to keyway
-
Alternative Part NumberH4015X 1 1/4
-
UNSPSC31171900
-
Package Description1/PK
-
Standards/ApprovalsANSI Specified
-
Warranty1 Year
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Browning 15-TOOTH #60-1 CHAIN SPROCKETS BRW H-6015 X 1-1/4
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
3/8" X 4-1/2" Round Head Slot Machine Screws
Bussmann NON-60 Non-Current Limiting One Time Fuse, 60 A, 250 VAC, 125 VDC, 50 kA Interrupt, Class: H/K5, Cylindrical Body
Bussmann NON-60 Non-Current Limiting One Time Fuse, 60 A, 250 VAC, 125 VDC, 50 kA Interrupt, Class: H/K5, Cylindrical Body
Porter-Cable® 43411 Router Bit, Beading Router, 1/2 in D Cutting, 1/4 in Dia Shank, HSS
K7 THUMB HANDLE DRILL CHUCK KEY 7/32" PILOT-JAC3659 >
Browning® 1080126 Type S1 Split-Taper Bushing, 2-1/2 in Dia Bore, 4.418 in Dia Small End/4-5/8 in Dia Large End Dia Barrel, 6-3/8 in Dia Flange, 4-3/8 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
