Browning® 1108760 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 5/8 in Dia Bore, 3.52 in OD, #50 Chain, 16 Teeth, 5/8 in Pitch, Steel
Browning® 1108760 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 5/8 in Dia Bore, 3.52 in OD, #50 Chain, 16 Teeth, 5/8 in Pitch, Steel
-
BrandBrowning®
-
UPC662289301355
-
Manufacturer Part Number1108760
-
CountryUSA
-
Pitch5/8 in
-
Pitch Diameter3.204 in
-
MaterialSteel
-
Chain Size#50
-
TypeSingle Strand Plate Type A
-
Number of Teeth16
-
Outside Diameter3.52 in
-
Length Through Bore0.343 in
-
Bore Diameter5/8 in
- Solid plate
- No hub projection
- High quality, high carbon steel
- Browning® offers type A plate steel sprockets in single strands
- Lasts longer than sprockets made from low carbon steel
- For use with 5/8 in pitch ANSI chain
-
Alternative Part Number50A16
-
UNSPSC31171901
-
Package Description1/PK
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Browning® 1108760 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 5/8 in Dia Bore, 3.52 in OD, #50 Chain, 16 Teeth, 5/8 in Pitch, Steel
Browning® 1108760 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 5/8 in Dia Bore, 3.52 in OD, #50 Chain, 16 Teeth, 5/8 in Pitch, Steel
MODULE CONVERSION PHONE JACK >SURFACE MOUNTING CONNECTORS STATION WIRE TO A STANDARD PHONE JACK CONNECT A STANDARD PHONE. MOUNTS TO A STANDARD ELECTRICAL BOX OR DRYWALL.-JWH502901 >
MORSE® 52128 5423 Standard Length Spade Drill, 7/16 in Drill - Fraction, 0.4375 in Drill - Decimal Inch, 3 in D Cutting, 2 Flutes
MORSE® 52128 5423 Standard Length Spade Drill, 7/16 in Drill - Fraction, 0.4375 in Drill - Decimal Inch, 3 in D Cutting, 2 Flutes
Browning® 1110261 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth and Keyway, 1 in Dia Bore, 4.184 in OD, #100 Chain, 9 Teeth, 1-1/4 in Pitch, Steel
Browning® 1110261 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth and Keyway, 1 in Dia Bore, 4.184 in OD, #100 Chain, 9 Teeth, 1-1/4 in Pitch, Steel
BBI 644091 Partially Threaded Hex Bolt, M10x1.5, 65 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
BBI 644091 Partially Threaded Hex Bolt, M10x1.5, 65 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
Sealmaster® 700983 SPM Medium Duty High Base Pillow Block Ball Bearing Unit, 1-3/16 in Dia Bore, 5-3/8 to 6-1/8 in L Bolt Center-to-Center, 2 in Base to Bore Centerline, 7-1/2 in OAL x 3-7/8 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
