Browning 28-TOOTH #40-1-CHAIN SPROCKETS BRW H-4028 X 1-1/8
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
-
BrandBrowning®
-
UPC662289983902
-
Manufacturer Part Number1880467
-
CountryUSA
-
Pitch Diameter4.466 in
-
MaterialSteel
-
Chain Size#40
-
TypeSingle Strand Finished Bore Type 1
-
Hub Diameter3.266 in
-
Number of Teeth28
-
Outside Diameter4.74 in
-
Length Through Bore1 in
-
Bore Diameter1-1/4 in
- Furnished with standard keyway on centerline of tooth and hollow head setscrew over keyway
- In-stock hardened sprockets are warranted to last at least twice as long as the standard (unhardened) mild steel sprockets they replace
- For use with 1/2 in pitch ANSI chain
- Additional setscrew at 90 deg to keyway
-
Alternative Part NumberH4028X 1 1/4
-
UNSPSC31171901
-
Package Description1/PK
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Browning 28-TOOTH #40-1-CHAIN SPROCKETS BRW H-4028 X 1-1/8
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Little Giant® 620219 WS Series Effluent Pump, 115 gpm Max Flow, 10 ft Rated Head, Automatic, 63 ft Max Head, 115 V, 1 ph
Little Giant® 620219 WS Series Effluent Pump, 115 gpm Max Flow, 10 ft Rated Head, Automatic, 63 ft Max Head, 115 V, 1 ph
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
MORSE® 50821 5376 Straight Flute Drill Bit, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 1-5/8 in D Cutting, 2 Flutes, Solid Carbide
Pyramex® SB1810S Safety Eyewear, Anti-Scratch, Clear Lens, Black, Nylon 6.6 Frame, Polycarbonate Lens, ANSI P Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
Drillco 285A080A 2850 Spiral Point Tap, Right Hand Cutting, M8x1.25 Thread, D5 Thread Limit, Plug Chamfer, 2 Flutes, Uncoated, HSS
The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.

