Browning® 1126457 Double Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth, 1 to 3-5/16 in Dia Bore, 6.59 in OD, 80 Chain, 19 Teeth, 1 in Pitch, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
-
BrandBrowning®
-
UPC662289112975
-
Manufacturer Part Number1126457
-
CountryUSA
-
Pitch Diameter6.076 in
-
MaterialSteel
-
Chain Size80
-
TypeDouble Strand Minimum Bore Type B
-
Hub Diameter5 in
-
Number of Teeth19
-
Outside Diameter6.59 in
-
Length Through Bore2-3/4 in
-
Bore Diameter1 to 3-5/16 in
- Larger hub diameter allows larger bore capacity
- Maximum bore shown will accommodate standard keyways and setscrews over keyway
- Slightly larger bores are possible with no keyway, shallow keyway or setscrew at angle to keyway
- Hub projection on one side
- High quality, high carbon steel
- Lasts longer than sprockets made from low carbon steel
- Large hub diameters, provides flexibility when reboring
- For use with 1 in pitch ANSI chain
-
Alternative Part NumberD80B19
-
UNSPSC31171901
-
Package Description1/PK
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Browning® 1126457 Double Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth, 1 to 3-5/16 in Dia Bore, 6.59 in OD, 80 Chain, 19 Teeth, 1 in Pitch, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
Leviton® Black & White® 50 A non-NEMA locking devices are designed for faster wiring and longer life. Made from tough, impact resistant nylon housings and metal shrouds, these plugs, connectors, receptacles and flanged inlets are designed for rugged environments like construction sites, commercial shipyards and convention centers.
GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.
3/4" GR-80 ALLOY LOG CHAIN >(FT)-TCI18026 >
5-MM X 1000-MM STAINLESS STEEL THREADED ROD-MET9750051000SS >
Apex® 440-TX-30-H Insert Tamper-Resistant Screwdriver Bit, T-30-H Torx® Point, 1 in OAL
Apex® 440-TX-30-H Insert Tamper-Resistant Screwdriver Bit, T-30-H Torx® Point, 1 in OAL
