Browning® 1126515 Double Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth, 1 to 3-1/2 in Dia Bore, 8.52 in OD, 80 Chain, 25 Teeth, 1 in Pitch, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
-
BrandBrowning®
-
UPC662289182961
-
Manufacturer Part Number1126515
-
CountryUSA
-
Pitch Diameter7.979 in
-
MaterialSteel
-
Chain Size80
-
TypeDouble Strand Minimum Bore Type B
-
Hub Diameter5-1/4 in
-
Number of Teeth25
-
Outside Diameter8.52 in
-
Length Through Bore3 in
-
Bore Diameter1 to 3-1/2 in
- Larger hub diameter allows larger bore capacity
- Maximum bore shown will accommodate standard keyways and setscrews over keyway
- Slightly larger bores are possible with no keyway, shallow keyway or setscrew at angle to keyway
- Hub projection on one side
- High quality, high carbon steel
- Lasts longer than sprockets made from low carbon steel
- Large hub diameters, provides flexibility when reboring
- For use with 1 in pitch ANSI chain
-
Alternative Part NumberD80B25
-
UNSPSC31171901
-
Package Description1/PK
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Browning® 1126515 Double Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth, 1 to 3-1/2 in Dia Bore, 8.52 in OD, 80 Chain, 25 Teeth, 1 in Pitch, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
Milwaukee® 48-13-5750 Heavy Duty Solid Center Ship Auger Bit, 3/4 in Dia, 18 in OAL, 15 in L Spiral Flute, 7/16 in Shank
The Milwaukee® 3/4 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
5/16"-18 INSTALLATION TOOLS-THR1182105 >
156" X 14-GAUGE GALVANIZED BALER TIES--PACK OF 250 - PAK13014GALV>
