Browning® 1125921 Double Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth, 1 to 2-1/2 in Dia Bore, 6.72 in OD, 50 Chain, 32 Teeth, 5/8 in Pitch, Hardened Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
-
BrandBrowning®
-
UPC662289162338
-
Manufacturer Part Number1125921
-
CountryUSA
-
Pitch Diameter6.376 in
-
MaterialHardened Steel
-
Chain Size50
-
TypeDouble Strand Minimum Bore Type B
-
Hub Diameter3-3/4 in
-
Number of Teeth32
-
Outside Diameter6.72 in
-
Length Through Bore1-7/8 in
-
Bore Diameter1 to 2-1/2 in
- Larger hub diameter allows larger bore capacity
- Maximum bore shown will accommodate standard keyways and setscrews over keyway
- Slightly larger bores are possible with no keyway, shallow keyway or setscrew at angle to keyway
- Hub projection on one side
- High quality, high carbon steel
- Lasts longer than sprockets made from low carbon steel
- Large hub diameters, provides flexibility when reboring
- For use with 5/8 in pitch ANSI chain
-
Alternative Part NumberD50B32
-
UNSPSC31171901
-
Package Description1/PK
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Browning® 1125921 Double Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth, 1 to 2-1/2 in Dia Bore, 6.72 in OD, 50 Chain, 32 Teeth, 5/8 in Pitch, Hardened Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
1-1/16" -16" FOUR FLUTE HAND BOTTOMING TAP-PDTEK6511163B >
EPDM 2-PIECE INSERTS WITH RINGS-LOV6E >
Browning® 1125442 Double Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth, 1/2 to 3/4 in Dia Bore, 2 in OD, 40 Chain, 11 Teeth, 1/2 in Pitch, Hardened Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA112K>
WHEEL ARBORS-MGW66250613185>
