Browning® 1125202 Double Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth, 1/2 to 13/16 in Dia Bore, 1.99 in OD, 35 Chain, 15 Teeth, 3/8 in Pitch, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
-
BrandBrowning®
-
UPC662289319855
-
Manufacturer Part Number1125202
-
CountryUSA
-
Pitch Diameter1.804 in
-
MaterialSteel
-
Chain Size35
-
TypeDouble Strand Minimum Bore Type B
-
Hub Diameter1-13/32 in
-
Number of Teeth15
-
Outside Diameter1.99 in
-
Length Through Bore1-1/4 in
-
Bore Diameter1/2 to 13/16 in
- Larger hub diameter allows larger bore capacity
- Maximum bore shown will accommodate standard keyways and setscrews over keyway
- Slightly larger bores are possible with no keyway, shallow keyway or setscrew at angle to keyway
- Hub projection on one side
- High quality, high carbon steel
- Lasts longer than sprockets made from low carbon steel
- Large hub diameters, provides flexibility when reboring
- Hub is recessed for chain clearance
- For use with 3/8 in pitch ANSI chain
-
Alternative Part NumberD35B15
-
UNSPSC31171901
-
Package Description1/PK
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Browning® 1125202 Double Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth, 1/2 to 13/16 in Dia Bore, 1.99 in OD, 35 Chain, 15 Teeth, 3/8 in Pitch, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
BBI 644172 Partially Threaded Hex Bolt, M16x2, 80 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
BBI 644172 Partially Threaded Hex Bolt, M16x2, 80 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
773263 DO-IT-BEST/KILZ ORIGINAL 13 OZ. PRIMER SEALER STAINBLOCKER SPRAY, WHITE
KILZ BLOCKS STAINS, CAN TOP COATE WITH LATEX OR OIL-BASED PAINT. SEALS POROUS SURFACES
-JWH773263 >
Armstrong® 27-724 Regular Length Tappet Open End Wrench, 3/4 x 7/8 in Wrench, Double Head, 15 deg Offset, 10 in L, High Alloy Steel, Satin Chrome
Armstrong® 27-724 Regular Length Tappet Open End Wrench, 3/4 x 7/8 in Wrench, Double Head, 15 deg Offset, 10 in L, High Alloy Steel, Satin Chrome
1/4" X 6" ZINC COATED PEGHOOKS-SOUT216H >
12-FEMALE JIC 37-DEGREE SWIVEL FITTING-FTGJF1212 >
