Browning® 3749009 Taper Lock Bushing, 1-9/16 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
Browning® 3749009 Taper Lock Bushing, 1-9/16 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
-
BrandBrowning®
-
UPC662289611997
-
Manufacturer Part Number3749009
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating4300 in-lb
-
Screw Size3/8 x 5/8 in
-
Number of Bolt Holes2
-
Barrel Diameter2-1/4 in
-
Keyway Size3/8 x 3/16 in
-
Bolt Circle Diameter2-1/8 in
-
Bore Diameter1-9/16 in
-
Overall Length1 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
-
Alternative Part Number1610X 1 9/16
-
UNSPSC31163205
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Browning® 3749009 Taper Lock Bushing, 1-9/16 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
Browning® 3749009 Taper Lock Bushing, 1-9/16 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
3" MEDIUM SCOTCHBRITE DISC-MMM05531 >
Specifically designed for hand held operations in materials up to 3/8 in. thick, these Carbide tipped steel plate cutters stay sharper longer than high speed steel or bi-metal hole saws. They produce drill press quality holes even in hand held operations. For cutting materials over 3/8 in. up to a depth of 1/2 in., a drill press is recommended. When cutting depth is over 1/4 in., use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution.
Browning® 1073519 QD Bushing, 2-7/8 in Dia Bore, 3-13/16 in Dia Barrel, 6 in Dia Flange, 2.64 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
4-GRV 3-V-BELT QUICK DISCONNECT SDS-BUSH SHEAVES-IDC4/3V0500SDS >
4/5-V-0550-SD 4-groove 5-v-belt QD Sd-bushing Sheave
4-GROOVE 5-V-BELT QD SD-BUSHING SHEAVE - IDC4/5V0550SD>
