Dodge® 117125 Stock Bore Taper Lock Bushing, 2-7/16 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475092543
-
Manufacturer Part Number117125
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating24000 in-lb
-
TypeStock Bore
-
Screw Size5/8 x 1-1/4 in
-
Number of Bolt Holes2
-
Hub Diameter5.63 in
-
Barrel Diameter4-1/4 in
-
Keyway Size5/8 x 5/16 in
-
Bolt Circle Diameter4 in
-
Bore Diameter2-7/16 in
-
Overall Length2 in
- Size 3020 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number3020 X 2-7/16-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Catalog
-
Specification Sheet
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Dodge® 117125 Stock Bore Taper Lock Bushing, 2-7/16 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
Dixon® BFVW300 Wafer Style Butterfly Valve, 4-1/2 x 5 in Nominal, MNST x FNST End Style, 150 lb, Ductile Iron Body, PTFE Bushing Softgoods
Dixon® BFVW300 Wafer Style Butterfly Valve, 4-1/2 x 5 in Nominal, MNST x FNST End Style, 150 lb, Ductile Iron Body, PTFE Bushing Softgoods
Jacobs® 30346 Chuck Service Kit, For Use With 16N Model Chucks
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
Dodge® 023021 307 Type E-Xtra Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 10.81 to 11.19 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 14 in OAL 7-1/2 in OAH
Dodge® 023021 307 Type E-Xtra Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 10.81 to 11.19 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 14 in OAL x 7-1/2 in OAH
Electrical Outlet Strips
