Browning 2-5/16"-ID 2525-STYLE TL BUSHINGS BRW 2525 X 2-5/16
Browning® 3750015 Taper Lock Bushing, 2-5/16 in Dia Bore, 3-3/8 in Dia Barrel, 2-1/2 in OAL, Steel
-
BrandBrowning®
-
UPC662289617098
-
Manufacturer Part Number3750015
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating11300 in-lb
-
Screw Size1/2 x 1 in
-
Number of Bolt Holes2
-
Barrel Diameter3-3/8 in
-
Keyway Size5/8 x 5/16 in
-
Bolt Circle Diameter3-1/4 in
-
Bore Diameter2-5/16 in
-
Overall Length2-1/2 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
-
Alternative Part Number2525X 2 5/16
-
UNSPSC31163205
-
Package Description1/PK
-
Warranty1 Year
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Browning® 3750015 Taper Lock Bushing, 2-5/16 in Dia Bore, 3-3/8 in Dia Barrel, 2-1/2 in OAL, Steel
RIDGID® 32850, 6-S Heavy Duty Pipe Cutter, 4 to 6 in
BBI 403110 Partially Threaded Cap Screw, 3/8-16, 1-1/2 in L Under Head, 2 Grade, Carbon Steel, Zinc CR+3
BBI 403110 Partially Threaded Cap Screw, 3/8-16, 1-1/2 in L Under Head, 2 Grade, Carbon Steel, Zinc CR+3
Charlotte PVC 00448 0800 2-Way, 4 in nominal, Hub end style, SCH 40/STD, PVC, Domestic
PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140° F. PVC is lightweight and
26 TOOTH SPROCKETS FOR #35 CHAIN-IDC35B26F3/4 >
Browning® 1045632 VP Series Type 2 Variable Pitch Sheave, 1-1/8 in Finished Bore, 6-1/2 in OD, 1 Groove, 4.9 to 5.9 in (A/4L)/5.2 to 6.4 in (B/5L/5V) Dia Pitch, 7/8 to 1-1/4 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
