Browning 1-15/16"-ID 3020-STYLE TL BUSHINGS BRW 3020 X 1-15/16
Browning® 3750056 Taper Lock Bushing, 15/16 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Steel
-
BrandBrowning®
-
UPC662289617722
-
Manufacturer Part Number3750056
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating24000 in-lb
-
Screw Size5/8 x 1-1/4 in
-
Number of Bolt Holes2
-
Barrel Diameter4-1/4 in
-
Keyway Size1/4 x 1/8 in
-
Bolt Circle Diameter4 in
-
Bore Diameter15/16 in
-
Overall Length2 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
- Mounts flush in products - No protruding flanges to interfere with the drive
-
Alternative Part Number3020X15/16
-
UNSPSC31163205
-
Package Description1/PK
-
Warranty1 Year
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Browning® 3750056 Taper Lock Bushing, 15/16 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Steel
Jacobs® 30428DN Archer® 654 Standard Length Morse Taper Drill Sleeve, #4 Inside x #5 Outside, 3/4 in Projection, 6.69 in OAL
Jacobs® 30428DN Archer® 654 Standard Length Morse Taper Drill Sleeve, #4 Inside x #5 Outside, 3/4 in Projection, 6.69 in OAL
HCI Preferred Supplier 944429 Lift In-Line Check Valve, 3/8 in Nominal, NPT End Style, Forged Brass Body
HCI Preferred Supplier 944429 Lift In-Line Check Valve, 3/8 in Nominal, NPT End Style, Forged Brass Body
Chicago Pneumatic CP7830H Ratchet Wrench, 1/2 in Drive, 122 N-m Torque, 190 rpm Speed, 21 cfm Air Flow, 90 psi
The CP7830 features a maximum torque up to 90 ft.lbs / 122 Nm allowing quick and easy fastening. The progressive throttle allows users to apply the necessary amount of power safely and effectively. The tool benefits from the patented TriSpring Technology which guarantees anti-slip head design. The grease fitting option on the reverse button allows for easier lubrication. The pneumatic ratchet wrench CP7830 Series is composed of 2 models: 3/8 Inch and 1/2 Inch anvil.
AIR FILTERS
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
