Browning 1-3/16"-ID 1210-STYLE TL BUSHINGS BRW 1210 X 1.3/16
Browning® 3748621 Taper Lock Bushing, 13/16 in Dia Bore, 1-7/8 in Dia Barrel, 1 in OAL, Steel
-
BrandBrowning®
-
UPC662289611058
-
Manufacturer Part Number3748621
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating3600 in-lb
-
Screw Size3/8 x 5/8 in
-
Number of Bolt Holes2
-
Barrel Diameter1-7/8 in
-
Keyway Size3/16 x 3/32 in
-
Bolt Circle Diameter1-3/4 in
-
Bore Diameter13/16 in
-
Overall Length1 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
-
Alternative Part Number1210X13/16
-
UNSPSC31163205
-
Package Description1/PK
-
Warranty1 Year
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Browning® 3748621 Taper Lock Bushing, 13/16 in Dia Bore, 1-7/8 in Dia Barrel, 1 in OAL, Steel
Sioux Chief TKO™ 887-PM 1-Piece Open Closet Flange With Stainless Steel Swivel Ring, PVC
At Sioux Chief we design our open flanges with the same care and precision as we do the TKO. Contractors have found the open flange to be a cost effective alternative in those instances where a test cap is not needed. These include installations after the system is tested or where no testing is performed. We complement our complete line of open flanges with five different connection types, in ABS or PVC, 1-piece or with a corrosion-resistant, 430 stainless steel swivel ring.
Morse® 216128 MHSG Hole Saw, 3/4 in Dia, 1-15/16 in D Cutting, Tungsten Carbide Cutting Edge, 1/2-20 Arbor
Long lasting choice for very hard abrasive materials. These hole saws create clean holes in materials too hard or abrasive for standard bi-metal saws or so thin they would strip bi-metal or chip carbide teeth.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Chapin® 1949 Concrete Open Head Sprayer, 3.5 gal, 0.5 to 1 gpm, 40 to 60 psi, 48 in Hose Length, Tri-poxy® Steel Tank
The Chapin® industrial FKM concrete sprayer has a 3.5 gal Tri-Poxy® lined steel tank that provides triple protection against rust, corrosion and damage from denting. Featuring a large 4 in mouth opening for easy filling and cleaning, brass wand, brass shut-off, brass fan tip nozzle for even coverage, a 48 in reinforced hose with threaded fittings and FKM seals for most concrete sealer applications (check chemical manufacturers instructions before use). Our open head tanks have a unique tri-lock seal that insures the pump cap locks tightly into place.
HORSEHAIR COUNTER BRUSH-FLP380B >
