Dodge® 117112 Stock Bore Taper Lock Bushing, 1-5/8 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
-
BrandDodge®
-
UPC782475092420
-
Manufacturer Part Number117112
-
CountryUSA
-
Taper8 deg
-
MaterialSintered Steel
-
Torque Rating24000 in-lb
-
TypeStock Bore
-
Screw Size5/8 x 1-1/4 in
-
Number of Bolt Holes2
-
Hub Diameter5.63 in
-
Barrel Diameter4-1/4 in
-
Keyway Size3/8 x 3/16 in
-
Bolt Circle Diameter4 in
-
Bore Diameter1-5/8 in
-
Overall Length2 in
- Size 3020 bushing
- Clean and compact design
- Easy On/Off operation
- 8 deg taper grips tight, holds tight, runs true and no wobble
- Flush mounting and no protruding parts
-
Alternative Part Number3020 X 1-5/8-KW
-
UNSPSC31171605
-
Package DescriptionEACH
-
Standards/ApprovalsABMA|AGMA|BSA|CEMA|MPTA|PTDA Standards
-
WarrantyLimited
-
Warranty Information
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Dodge® 117112 Stock Bore Taper Lock Bushing, 1-5/8 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
Browning® 3749215 Taper Lock Bushing, 1/2 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel
Sealmaster 1-3/4"-ID 2-BOLT TRB PILLOW BLOCKS SEA RPB-112-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
3-LB RED PLAID FOOD TRAY--CS/500-WHY35300 >
Milwaukee® 49-16-2756 Cordless Low Profile Chainsaw Guide Bar, 14 in L, 0.043 in, 3/8 in Pitch, Steel, Gray
The MILWAUKEE® 14" 3/8" LOW PROFILE™ Pitch, .043" Gauge Guide Bar is made with lightweight material and is easy to maneuver for controlled cuts. The narrow kerf bar offers more cuts per charge versus standard kerf bars to help maximize battery efficiency. This bar is recommended for use with the M18 FUEL™ 14" Chainsaw (2727-20) and 14" 3/8" LOW PROFILE™ Pitch, .043" Gauge Saw Chain (49-16-2749) and fits chainsaws with an A041 tail mount & narrow kerf chains of the same pitch, gauge, length, and drive links.
SYNTHETIC POLYOLEFIN FILAMENT BRISTLES. SQUARED TRIMMED, PROCESSED TIP. YELLOW PLASTIC HANDLE. NOT RECOMMENDED FOR ONE COAT PAINTS. FOR USE WITH POLYBAG AND ADHESIVES.
-JWH772186 >
