Browning® 3748977 Taper Lock Bushing, 1-3/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
Browning® 3748977 Taper Lock Bushing, 1-3/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
-
BrandBrowning®
-
UPC662289611652
-
Manufacturer Part Number3748977
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating4300 in-lb
-
Screw Size3/8 x 5/8 in
-
Number of Bolt Holes2
-
Barrel Diameter2-1/4 in
-
Keyway Size5/16 x 5/32 in
-
Bolt Circle Diameter2-1/8 in
-
Bore Diameter1-3/8 in
-
Overall Length1 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
- Size 1610 bushing
- Mounts flush in products no protruding flanges to interfere with the drive
- Key to key drive cap screws act as an external key
- 1-1/2 in/ft taper on barrel since this is a non-self locking taper it provides ease of installation and removal of products from the shaft
-
Alternative Part Number1610X 1 3/8
-
UNSPSC31163205
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Browning® 3748977 Taper Lock Bushing, 1-3/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
Browning® 3748977 Taper Lock Bushing, 1-3/8 in Dia Bore, 2-1/4 in Dia Barrel, 1 in OAL, Steel
Dichtomatik N70440 O-Ring, 440 Dash Number, 6.725 in ID x 7.275 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
4-1/2" X 5-1/4" CLEAR LENS Offers superior protection from dust, weld spatter and impact. Meets ANSI Z87.1 Safety Standards.
3 GROOVE 3-V-BELT QUICK DISCONNECT SDS-BUSH SHEAVES-IDC3/3V0650SDS >
1-3/8" -ID 2-BOLT FLANGE UNIT-MBUVF2S122M >
PROJECTOR BULBS
