Browning 1-3/16"-ID QD SDS-STYLE BUSHINGS BRW SDS-1.3/16
Sure-GripĀ® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-GripĀ® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandTB Wood'sĀ®
-
UPC698672700436
-
Manufacturer Part NumberSDS13/16
-
CountryUSA
-
MaterialSteel
-
Flange Diameter3-3/16 in
-
Flange Thickness7/16 in
-
Torque Rating5000 in-lb
-
TypeStandard
-
Screw Size1/4-20 x 1-3/8 in
-
Number of Bolt Holes3
-
Barrel Diameter2-3/16 in
-
Keyway Size3/16 x 3/32 in
-
Bolt Circle Diameter2-11/16 in
-
Bore Diameter13/16 in
-
Overall Length1-5/16 in
- Size SDS bushing
- 6-hole drilling makes installation and removal quick and easy
- Keyseat 180 deg from split, precise taper provides proper wedging action
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171605
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Sure-GripĀ® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-GripĀ® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
WiltonĀ® WL9-21803 Regular Duty I-Bar Clamp, 1-13/16 in D Throat, 36 in Jaw Opening
WiltonĀ® WL9-21803 Regular Duty I-Bar Clamp, 1-13/16 in D Throat, 36 in Jaw Opening
DodgeĀ® 023111 215 Non-Expansion Type E-Xtra Triple Lip Flange Mount Roller Bearing Unit, 3 in Dia Bore, 6 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 7-3/4 in OAL/Dia
DodgeĀ® 023111 215 Non-Expansion Type E-Xtra Triple Lip Flange Mount Roller Bearing Unit, 3 in Dia Bore, 6 in L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 7-3/4 in OAL/Dia
JacobsĀ® 14445 34-33 Fluted Heavy Duty Drill Chuck, 0.04 to 0.5 in Capacity, 33JT Mounting, Plain Bearing, K3
JacobsĀ® 14445 34-33 Fluted Heavy Duty Drill Chuck, 0.04 to 0.5 in Capacity, 33JT Mounting, Plain Bearing, K3
1-9/16"-ID HIGH PILLOW BLOCK UNITS-FYHUPC20825>
