Browning 1-1/16"-ID QD SD-STYLE BUSHINGS BRW SD-1.1/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandTB Wood's®
-
UPC698672700719
-
Manufacturer Part NumberSD11/16
-
CountryUSA
-
MaterialSteel
-
Flange Diameter3-3/16 in
-
Flange Thickness7/16 in
-
Torque Rating5000 in-lb
-
TypeStandard
-
Screw Size1/4-20 x 1-7/8 in
-
Number of Bolt Holes3
-
Barrel Diameter2-3/16 in
-
Keyway Size3/16 x 3/32 in
-
Bolt Circle Diameter2.688 in
-
Bore Diameter11/16 in
-
Overall Length1.81 in
- Size SD bushing
- 6-hole drilling makes installation and removal quick and easy
- Keyseat 180 deg from split, precise taper provides proper wedging action
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171605
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
PBE-920 1-3/8"-ID 2-bolt Trb Pillow Block
1-3/8"-ID 2-BOLT TRB PILLOW BLOCK
Dodge® 124462 204 Normal Duty Pillow Block Ball Bearing Unit, 3/4 in Dia Bore, 2 in L Bolt Center-to-Center, 1.31 in Base to Bore Centerline, 2.88 in OAL x 2.56 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
GEARWRENCH® 86996 Extra Large Kneeling Pad, 24 in L x 16 in W x 1-1/8 in THK, EVA Foam
The GEARWRENCH® Kneeling Pad is the super convenient way to keep your knees comfortably off of a hard or rough floor. A built in grab handle makes it easy to position or hang up when not in use. Three layers of high-density solvent resistant foam provide an unmatched degree of cushioning so you can get the job done in comfort. A magnetized recess holds nuts, bolts, and spare parts.
United Abrasives-SAIT 1AX Blue Line™ 57510 Portable Semi-Friable Coated Abrasive Belt, 3 in W x 24 in L, 220 Grit, Very Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
