Browning 1-9/16"-ID QD SD-STYLE BUSHINGS BRW SD-1-9/16
Browning® 1076751 QD Bushing, 1-9/16 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.83 in OAL, Ductile Iron
-
BrandBrowning®
-
UPC662289344772
-
Manufacturer Part Number1076751
-
CountryUSA
-
MaterialDuctile Iron
-
Flange Diameter3-1/8 in
-
Flange Thickness7/16 in
-
Torque Rating5000 in-lb
-
Screw Size1/4-20 x 1-7/8 in
-
Number of Bolt Holes3
-
Barrel Diameter2-3/16 in
-
Keyway Size3/8 x 3/16 in
-
Bolt Circle Diameter2-11/16 in
-
Bore Diameter1-9/16 in
-
Overall Length1.83 in
-
Suitable For Use WithBrowning® Sheaves, Sprockets and Pulleys
- Reverse mounting ability - This bushing system allows for mounting on either side of the product to allow for a more flush view of the product face
- Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
- Reverse mounting ability - This bushing system allows for mounting on either side of the product to allow for a more flush view of the product face
-
Alternative Part NumberSD 1 9/16
-
UNSPSC31171516
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
Recently Viewed
Browning® 1076751 QD Bushing, 1-9/16 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.83 in OAL, Ductile Iron
White 10 Ft. long canvas covered, wire reinforced, rubber lined 1-1/2 in. I.D. hose has two molded cuff ends. Molded ends fit into swivel end or compression fit connectors which are ordered separately.
MORSE® 44561 4581 Center Cutting Double End Regular Length End Mill, 5/32 in Dia Cutter, 7/16 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/8 in OAL, Bright
Browning® 3748720 Taper Lock Bushing, 5/8 in Dia Bore, 1-7/8 in Dia Barrel, 1-1/2 in OAL, Steel
30-TOOTH #60-1-CHAIN SPROCKETS IDC 60-B-26-F1-7/16
30 TOOTH SPROCKETS FOR #60 CHAIN
Dichtomatik 75115269 O-Ring, 258 Dash Number, 5.984 in ID x 6.262 in OD, PTFE, 55 Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
