Browning 1-11/16"-ID QD SF-STYLE BUSHINGS BRW SF-1-11/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandTB Wood's®
-
UPC698672701655
-
Manufacturer Part NumberSF11116
-
CountryUSA
-
MaterialCast Iron
-
Flange Diameter4-5/8 in
-
Flange Thickness1/2 in
-
Torque Rating11000 in-lb
-
TypeStandard
-
Screw Size3/8-16 x 2 in
-
Number of Bolt Holes3
-
Barrel Diameter3-1/8 in
-
Keyway Size3/8 x 3/16 in
-
Bolt Circle Diameter3-7/8 in
-
Bore Diameter1-11/16 in
-
Overall Length2 in
- Size SF bushing
- 6-hole drilling makes installation and removal quick and easy
- Keyseat 180 deg from split, precise taper provides proper wedging action
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171605
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Milwaukee® M18 FUEL™ 2745-20 Brushless Cordless Framing Nailer, 2 to 3-1/2 in Fastener, For Fastener Type: 30 deg Framing Nailer, 51 lb Magazine, 14.1 in OAL, Battery
The MILWAUKEE® M18 FUEL™ 30 Degree Framing Nailer sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp-up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ Batteries (not included) and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and reducing associated maintenance. The M18 FUEL™ 30 Degree Framing Nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge.
AIR FILTERS
2" PONY SPRING CLAMP-JWH319943 >
Blackburn® ADR6 Type ADR-ALCUL Dual-Rated Mechanical Lugs, 14 to 6 AWG Conductor Aluminum/Stranded Copper Conductor, 1/4 in Stud, 1 Bolt Holes
Blackburn® cast, forged or formed mechanical connections, produced in economical copper and dual-rated aluminum, provide unequaled variety with a large variety of UL and CSA certified solutions for your electrical interface needs.
HARRINGTON LX003 LX Mini Lever Chain Hoist, 1/4 ton Load, 5 ft H Lifting, 40 lb Rated, 0.8 in Hook Opening
Don't be fooled by its award winning toolbox sized design, our LX mini puller is no lightweight. Its robust aluminum housing, heat treated gears and nickel plated load chain make this a small hoist that delivers huge durability and performance. Our LX is capable of positioning your load exactly where you want it making it the ideal lever hoist for work in tight quarters or in elevated locations.
