TB Wood's® Sure-Grip® JA118 Standard QD Bushing, 1-1/8 in Dia Bore, 1-3/8 in Dia Barrel, 2 in Dia Flange, 1 in OAL, Steel
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandTB Wood's®
-
UPC698672700115
-
Manufacturer Part NumberJA118
-
CountryUSA
-
MaterialSteel
-
Flange Diameter2 in
-
Flange Thickness5/16 in
-
Torque Rating1750 in-lb
-
TypeStandard
-
Screw Size#10-24 x 1 in
-
Number of Bolt Holes3
-
Barrel Diameter1-3/8 in
-
Keyway Size1/4 x 1/16 in
-
Bolt Circle Diameter1.656 in
-
Bore Diameter1-1/8 in
-
Overall Length1 in
- Size JA bushing
- 6-hole drilling makes installation and removal quick and easy
- Keyseat 180 deg from split, precise taper provides proper wedging action
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171605
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
TB Wood's® Sure-Grip® JA118 Standard QD Bushing, 1-1/8 in Dia Bore, 1-3/8 in Dia Barrel, 2 in Dia Flange, 1 in OAL, Steel
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
TB Wood's® Sure-Grip® SD158 Standard QD Bushing, 1-5/8 in Dia Bore, 2-3/16 in Dia Barrel, 3-3/16 in Dia Flange, 1.81 in OAL, Steel
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
