HE-30 X 2-11/16 Dodge® 206631 Conveyor Bushing, 2-11/16 in Dia Bore, 5-5/8 in Dia Flange, 2-3/4 in OAL
Dodge® 206631 Conveyor Bushing, 2-11/16 in Dia Bore, 5-5/8 in Dia Flange, 2-3/4 in OAL
-
BrandDodge®
-
UPC782475269617
-
Manufacturer Part Number206631
-
CountryUSA
-
Flange Diameter5-5/8 in
-
Flange Thickness7/8 in
-
Screw Size1/2-13 x 2-1/4 in
-
Number of Bolt Holes4
-
Hub Diameter1-7/8 in
-
Keyway Size5/8 x 5/16 in
-
Bolt Circle Diameter4-11/16 in
-
Bore Diameter2-11/16 in
-
Overall Length2-3/4 in
-
Suitable For Use WithConveyor Pulley
- Size HE-30 bushing
- Most dependable mounting system for conveyor pulleys
- Specifically designed for drum and wing pulley
- Flange mount design
- Easy and intuitive removal method
- Taper angel of 14 deg reduces axial movement along the shaft to tighten the bushing
- Disc deflection and restressing are greatly reduced
-
Alternative Part NumberHE30 X 2-11/16-KW
-
UNSPSC31171603
-
Standards/ApprovalsCEMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
HE-30 X 2-11/16 Dodge® 206631 Conveyor Bushing, 2-11/16 in Dia Bore, 5-5/8 in Dia Flange, 2-3/4 in OAL
Dodge® 206631 Conveyor Bushing, 2-11/16 in Dia Bore, 5-5/8 in Dia Flange, 2-3/4 in OAL
TCM118X140X13SC>
GARVIN® LT100 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 1 in Hub, Die Cast Aluminum, Powder Coated
1 in T-style conduit bodies are attached to 1 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
ROUTER BIT 5/32 ROMAN OGEE-JWH348270>
ISOSTATIC™ Oilube® 401237 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 15/16 in OD, 1 in W
ISOSTATIC™ Oilube® 401237 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 15/16 in OD, 1 in W
Crescent Wiss® has taken the Aviation Snip to the next level with the advanced MetalMaster® Aviation Snips. The precision-cast molybdenum blades have CNC-ground serrations which allow for more uniform serrations that provide a cleaner cut every time. They feature extended pivot bolt life due to the superior free-float design. The spring-action design allows for fast, effortless feed. The all-new latch design provides ergonomic single-handed operation for left or right handed users. New extended non-slip handle grips give users better control while cutting. The new generation of Crescent Wiss MetalMaster® will cut over 8 miles of steel and feature up to 10 times longer cut life than traditional Aviation Snips. They are available in left/straight cut, right/straight cut, and straight cut.
