Browning® 1069541 QD Idler Bushing, 5/8 in Dia Bore, 1.937 in Dia Barrel, 3 in Dia Flange, 3-41/64 in OAL, Steel
Browning® 1069541 QD Idler Bushing, 5/8 in Dia Bore, 1.937 in Dia Barrel, 3 in Dia Flange, 3-41/64 in OAL, Steel
-
BrandBrowning®
-
UPC662289239337
-
Manufacturer Part Number1069541
-
CountryUSA
-
MaterialSteel
-
Flange Diameter3 in
-
Flange Thickness13/32 in
-
Number of Bolt Holes5
-
Barrel Diameter1.937 in
-
Bearing TypeBall
-
Bolt Circle Diameter2-7/16 in
-
Bore Diameter5/8 in
-
Overall Length3-41/64 in
-
Suitable For Use WithBrowning® Sheaves, Sprockets, Gearbelt Pulleys and Gears
- Browning® idler bushings can be used to convert the following stock products into idlers
- For drive tightener
- Mating Spur Gears must have same pressure angle and pitch
- Standard Gear Rack - 1. Manufactured From Mild Steel, 2. 14 1/2 Pressure Angle - 32 to 3 DP, 3. 20 Pressure Angle - 20 to 4 DP, 4. 4 and 6 FT Available from Stock, 12 FT May Be Available on Some Sizes
- Modification Options Available - 1. Cut to Desired Length, 2. Milled and Matched Ends, 3. Drilled or Drilled and Tapped Holes for Mounting
-
Alternative Part NumberIDP1 5/8
-
UNSPSC31163217
-
Package DescriptionEACH
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® 1069541 QD Idler Bushing, 5/8 in Dia Bore, 1.937 in Dia Barrel, 3 in Dia Flange, 3-41/64 in OAL, Steel
Browning® 1069541 QD Idler Bushing, 5/8 in Dia Bore, 1.937 in Dia Barrel, 3 in Dia Flange, 3-41/64 in OAL, Steel
Bore Size: 1-1/4 inch Housing Type: 2-bolt split housing pillow block Lining: Babbitt lined
1/2" DIAMETERX4" SOCKET HEAD CAP SCREWS-HOL72248 >
Dodge® 129285 208 Normal Duty Pillow Block Adapter Ball Bearing, 1-1/2 in Dia Bore, 3-1/2 in L Bolt Center-to-Center, 1.94 in Base to Bore Centerline, 4.63 in OAL x 3.94 in OAH
The Grip Tight® ball bearing is shaft-ready right out of the box and offered in a variety of housing styles for normal and medium duty operations. It accommodates commercial grade and some undersized shafting to lower costs, and all Grip Tight® assemblies fit into a standard Dodge® ball bearing housing.
3/4" COPPER SWEAT UNIONS-ELK1023/4 >
FHP V-BELT 34."-JAS4L340 >
